Kit- 360
Please click once to view video
Kit- 360 Please click once to view video
CLICK ONCE TO WATCH THE “SHIPPING THE KIT 360” VIDEO.
Some people upgrade the rear-view mirrors located on the doors by using a 1995-1997 Oldsmobile Aurora mirror.
Additional kit information:
- This kit is an easy bolt-on conversion kit. This is the easiest to install kit we offer. This kit has been installed on an MR2 and completed in three weeks working only part-time on the project.
- Use a 2000-2005 Toyota MR2 Spider Convertible donor car. I suggest the mr2 be slightly damaged because the MR2 sheet metal will not be used on the finished kit and you will save a lot of money by using a damaged donor car. All unused MR2 body parts can be resold as scrap or resold on ebay as reusable mr2 body parts. We sell slightly damaged MR2 donor cars at great prices.
- the stock wheelbase of a MR2 is 96.5" and the wheelbase for the real deal is 102.3".
- You can either stretch the MR2 car body by about 5” or you may decide to not stretch the MR2 at all. This kit will fit a MR2 that is the stock 96.5” wheelbase or with a different trunk lid for the kit; that is offered by us at only $100.00 extra, you can then stretch the MR2 by about 5” so that the MR2 will then be about 101.5”. If you stretch the MR2 you cut the MR2 body between the wheel well and the door jam to add the extra metal section and use our extended trunk lid for the kit. We have two different trunk molds and one is 5” longer than the other. You will also add length to the kit on the inter quarter panel sections if the MR2 is stretched but this is easy to do. If you do not stretch the MR2 then the kit bolts right onto the MR2. Most people do not stretch the MR2 simply because it is faster and easier not to, but if you do take the time to stretch the mr2 the final result is a longer wheelbase that makes a nicer looking exotic styled car.
You can install this kit without doing any metal work or fiberglass work. This is a complete bolt-on kit.
You will use the stock door shell on the MR2, but you will attach it with screws to the 360 outer body kit door panel.
You will use the MR2 interior with this kit but some people upgrade the MR2 interior by taking it to an upholsetry shop and having the center part of the seats and the upper insert on the door inside interior panel colored the same color as the finished car. See photos for details.
Wheels: the largest wheel size that we recommend for the finished kit car is a 19” wheel. You may put a larger sized wheel on the 360 replica car, but we recommend a 19” wheel. You may order beautiful wheels from high-line wheels co. In Miami, Florida by calling 1-866-930-9698 OR 1-305-821-0045 and pay about $1,195.00 shipped with center caps. Ask them for their web-site address to view the wheels on-line. Ask for the five spoke Ferrari styled #202 wheel set. The tire size that you will need to buy for the wheels photographed on this 360 web page is a size 225/35/19 for the front and 275/30/19 for the rear tires. We pay $754.00 for a set of 4 tires mounted and balanced on the 360 replica wheels.
VISIT HIGH-LINE WHEEL CO.
IN MIAMI ONLINE AT WWW.HLWCORP.COM
Use wheel spacers to make the MR2 wider and we can help you obtain the spacers.
Some people add a carbon fiber dash kit off ebay for about $40.00.
Some people add a turbo simulator, which is also called an exhaust pipe whistler to the MR2. This makes the car sound like it has a bigger motor with a turbo and you can get this at any automotive parts store or on ebay for about $12.00 and install it inside the rear exhaust pipe.
MR2 wipers, convertible top, interior and windshield stay the same.
You can add a Garrett turbo kit for the MR2 at $2500.00 and increase from 138hp to 280hp.
Headlight lens for the front are $125.00 each and for the rear taillight lens you can use any 1984 and up corvette rear tail light lens from ebay at about $10.00 each. The round, Corvette, taillights you'll need for the KIT 360 are the CORVETTE
1984-1990, series C4, L.E.D. taillights. You can search eBay for "CORVETTE
taillight tail light C4" and then bid on the round, C4, style lights. You
can also search the salvage yards for used, CORVETTE taillights at
www.car-part.com <http://www.car-part.com/> or call one, large,
Corvette-only, salvage yard at 1-888-467-8388.
The black grill mesh can be bought at any hardware store for just a few dollars.
The motor in the MR2 is so good that the lotus exotic car company put it in the 2007 and up Lotus Elise vehicle. When you raise the hood on the 2007 Lotus Elise you will see a Toyota mr2 engine.
The average turn-key car is worth $25,000.00 to $40,000.00 and we can teach you how to own a completed car for around $12,000.00. (donor car $2500.00 + kit $6k + wheels and tires $2k + spacers $500.00 + paint materials $500.00 + misc. $500.00 = $12k)
A $500.00 deposit payable by paypal or check along with a signed purchase order gets your kit started. Your kit will then be completed within 30 days. Call for details.
We can sell you a real European front car tag with a black plastic holder for $50.00 or you can get one on ebay. Some people put this on the front bumper of the completed car.
You can use the MR2 donor car’s trunk and hood hinges on the 360 kit’s hood and trunk lid.
You can use a Pontiac Fiero’s gas cap door and gas cap door’s wire cable and the plastic piece inside the gas cap door on the 360 kit.
*THIS IS A LIST OF THE PARTS THAT MAKE UP THE 360 BODY-KIT WITH THE EXTRAS.
- ONE HOOD THAT IS MADE UP OF AN INNER AND OUTER PANEL. (INCLUDED IN THE 360 KIT PURCHASE)
- FRONT-CLIP THAT HAS THE BUMPER, FENDERS AND HEADLIGHT HOUSINGS MADE INTO IT. (INCLUDED)
- REAR-CLIP THAT HAS THE BACK BUMPER, QUARTER PANELS AND SIDE, ROCKER PANELS MADE INTO IT. (INCLUDED)
- TWO OUTER, DOOR PANELS. (INCLUDED)
- TRUNK PANEL. (INCLUDED)
- CONVERTIBLE TOP PANEL. (INCLUDED)
- TWO HEADLIGHT LENSES. ($250.00 FOR THE PAIR)
- INTERIOR KIT THAT “WE INSTALL” ON YOUR SEATS. (EXTRA CHARGE)
- INTERIOR KIT THAT “YOU INSTALL” ON YOUR SEATS. (EXTRA CHARGE)
- AURORA SIDE, REARVIEW MIRRORS. (EBAY OR WE OFFER THE SET FOR $80.)
- 1984-1996 CORVETTE TAILLIGHTS. (EBAY OR WE OFFER THE SET FOR $80.)
- HEADLIGHT PROJECTOR BULBS. (EBAY OR WE OFFER THE SET FOR $80.)
- METAL MESH FOR GRILLS. (EBAY OR PARTS STORE)
- REPLICA WHEELS. (HIGH-LINE WHEEL CO. WWW.HLWCORP.COM)
- NEW TIRES. (ANY LOCAL TIRE DEALER)
- WHEEL SPACERS. (WWW.WHEELADAPTER.COM)
- “NO DOOR HANDLE” SHAVED DOOR KIT. (EBAY)
- EUROPEAN TAG AND HOLDER ($50.00 FOR BOTH)
- WOODEN SHIPPING CRATE. (EXTRA CHARGE)
- KIT’S SHIPPING FEE. (WWW.FREIGHTQUOTE.COM)
Kit 360 Body Parts--Click image to enlarge
 |
 |
 |
 |
 |
|
 KIT 360 HEADLIGHT LENSES |
 KIT 360 TWO OUTER DOOR PANELS |
 KIT 360 CONVERTIBLE TOP COVER AND TRUNK LID |
 KIT 360 TWO-PART HOOD |
| Toyota MR2 with the sheet metal parts removed and ready for the 360 kit. | |
 1995 - 1997 Oldsmobile Aurora rearview mirrors are easy to install on the 360 kit and look much better than the MR2 rearview mirrors. |
|
 PHOTO OF THE 360 KIT LOADED IN A FORD F-150 TRUCK. |
|
Shipping this 360 kit is as easy as 1,2,3:
-NOTE: THE 360 BODY KIT WILL FIT INTO THE BACK OF A STANDARD SIZED PICKUP TRUCK LIKE A FORD F-150 OR A CHEVY 1500 SERIES BUT YOU WILL NEED TO USE A.T.V. STRAPS OR ROPE TO TIE THE BODY KIT DOWN IN THE BACK OF THE PICKUP TRUCK.
You will save money by having anything shipped in one crate that is as small
a crate as possible.
Here are the three choices to ship the 360 Kit:
1.Shipped in two crates: the front-clip, door-panels, hood and trunk parts
in a 3' tall x 7' wide x 5' long crate weighing 200 pounds, plus a second
crate which is the rear-clip section in a 3' tall x 7' wide x 9' long crate
weighing 150 pounds.
Note: Shippers charge more when you ship in two crates instead of only one
crate.
2. Shipped in one big crate: the front-clip, rear-clip and all other body
panels in one big 3' tall x 7' wide x 9' long crate weighing 350 pounds.
Note: you can get a quote for shipping both the big and the medium sizes of
the single crate shipment and decide how you want the 360 Kit shipped.
3. Shipped in one medium sized crate: this is the cheapest way to ship the
360 Kit. We cut through the long, rocker-panel area on each side of the 360
body Kit, in order to make the kit fit into a smaller crate. We cut a 3'
section off of each rocker panel and you can easily repair the two, cut,
rocker-panel pieces when the kit arrives at your address with some
fiberglass and resin. The front-clip, rear-clip and all other body panels
will then fit into one medium sized crate that is a 3' tall x 7' wide x 7'
long crate weighing 350 pounds. Note: call Dexter at 1-800-323-5441
extension 1214 for a shipping quote. You will need to give him our address
and your address and the size and weight of the crate and tell him the
contents are fiberglass vehicle parts. He will give you the cheapest
shipping quote i have found. I know he can ship this kit to London for under
$700.00. DEXTER WORKS FOR THE FREIGHT QUOTE COMPANY AND THEIR WEBSITE IS WWW.FREIGHTQUOTE.COM
YOU WILL NOT HAVE TO PAY FOR YOUR KIT UNTIL YOU ARRIVE TO PICK-UP YOUR KIT AT OUR FIBERGLASS SHOP. THAT WAY YOU CAN INSPECT THE WORKMANSHIP OF THIS FINE PRODUCT. A PRODUCT THAT WE ARE VERY PROUD TO OFFER AND ONE THAT WE STAND BEHIND WITH A 100% MONEY BACK GUARANTEE. MUCH ENGINEERING AND DESIGN WORKMANSHIP HAS GONE INTO THIS PRODUCT. IT IS LIKE NO OTHER REPLICA KIT OFFERED IN THE WORLD. MAP QUEST OUR LOCATION AT QUICK CASH CAR KIT INC. 10735 US HIGHWAY 431, ALBERTVILLE AL 35950-0142 OR CALL JACKIE AT 256-891-2030.
-WE ARE NOT AFFILIATED WITH ANY AUTOMOTIVE MANUFACTURER AND WE DO NOT OFFER ANY BADGES, EMBLEMS OR DECALS.
START LIVING YOUR SUPERCAR REPLICA DREAM TODAY.
Kit 360 $3,495.
This kit includes a 6 section body kit and you buy the MR2 donor car, wheels and lights. The kit’s 6 sections include a front-clip section, a rear-clip section, a hood, the outer door panels, trunk section, and the 2 hump section that covers the convertible top when it is lowered. We will tell you have to save big money on the taillights and you may buy the front headlight lens from us at $125. for each lens. An extended trunk section is available for $100. if you want to extend the wheelbase of the MR2 donor car.
