QUICK CASH CAR KIT INC.

Kit- Ash-Mart

Additional kit information:

This is a beautiful conversion kit. This kit is designed to be installed on a 1997-2006 Jaguar XK, XKR or XK8 series donor car.  The donor car can be in either a convertible or hard-top version. The top on the donor car will remain on the finished replica car project. The Jaguar interior is of the highest quality and the interior will also remain on the finished replica car project.

We suggest the donor be slightly damaged because the sheet metal will not be used on the finished car and you will save a lot of money by using a damaged donor car.  All unused body parts can be resold as scrap or on ebay as reusable body parts. We sell slightly damaged donor cars at great prices.

Please click only once to view video on our site.

Please click only once to view video on our site.

CLICK ONCE TO WATCH “BUILDING THE ASH-MART REPLICA CAR” VIDEO.

1. HEAD LIGHTS:For the Ash-Mart head lights, you will need to buy the front lens from us at $125.00 each and then buy the projector, head light, bulbs from any auto parts store or eBay. The head light housing section will come made into the Ash-Mart body kit and you will simply install the bulbs and lens in order to complete the head lights for the vehicle.
2. QUARTER PANELS:When you install the rear, quarter panel, kit sections you will only take off the back-half of the rear, quarter panel, outer, sheet-metal-skin, sections from the Jaguar. All of this will make more sense when you see the kit's parts laid next to the Jaguar.
3. TRUNK LID: When you install the rear, kit, trunk section you will need to cut the Jaguar's metal, trunk lid a little bit because the Ash-Mart trunk is not as big as the Jaguar. This trunk piece installation process will make more sense when you see the Jaguar with the kit's trunk piece laid next to it.
4. TAIL LIGHTS:If you use the 2001 - 2006 Chrysler Sebring convertible tail lights you will have to do a little fiberglass work to make them fit but the required modifications will be minor.
5.  DONOR CAR MODELS:A jaguar xk or xkr or a xk8 will work as a donor car for this kit because they are all the same body style. The only difference is the different engine features each of the three models offer. The xk has the 3.2 liter motor and the xk8 has the 4 liter motor and the xkr has the 4 liter motor that also comes with a super-charger on the motor. The xk8 is the most common jaguar people use with this Supercar replica kit and the xk8 is also the easiest model to locate for purchase.
6. WHEEL SPACERS: You will have to add wheel spacers to the Jaguar because the Ash-Mart kit is wider than the Jaguar. The thickness of your wheel spacers will be determined by the type of wheels you decide to install on your finished Ash-Mart Supercar replica. For example a deep dish wheel will require a different wheel spacer than a standard wheel.
7. GAS DOOR LID: For the gas door lid use a 2000-2005 Mitsubishi Eclipse alloy, gas door lid for around $49.00. A new gas, door lid is $1,504.00.
8. FOG LIGHTS: for the fog lights use factory, fog-driving lights or use
   2004-2006 Pontiac grand prix or 2006-2007 Pontiac solstice factory fog
   lights. The grand prix and the solstice are exactly the same fog light. You
   will have to do a little fiberglass work to make the Pontiac fog lights
   work, but they will save you money. You can find a new pair on Ebay for
   around $59.00 per pair. Note: see photo of Pontiac lights below.
9.  ASH-MART GRILL:
   
   MR. DAVE VANZANT IS THE OWNER OF "MR. GRILL COMPANY" IN CALIFORNIA. HIS WEB
   SITE IS WWW.MRGRILLE.COM <http://www.mrgrille.com/>  AND THEY MAKE CUSTOM,
   BILLET GRILLS. I WILL SOON BE OFFERING A CUSTOM, BILLET GRILL MADE JUST FOR
   THE ASH-MART KIT. I AM WORKING WITH DAVE NOW IN ORDER TO SOON HAVE THE
   PERFECT, FRONT GRILL FOR THE ASH-MART. THE GRILL SHOULD BE AROUND $200.00
   AND AVAILABLE SOON.
   
   
   *LIST OF THE PARTS THAT MAKE UP THE ASH-MART BODY-KIT WITH THE EXTRAS.
   
   1. FRONT-CLIP THAT HAS THE HOOD, BUMPER, FENDERS AND HEADLIGHT HOUSINGS MADE INTO IT. (THIS IS "INCLUDED" IN THE ASH-MART KIT PURCHASE ALONG WITH THE OTHER ITEMS MARKED "INCLUDED.")
   
   2. BACK BUMPER. (INCLUDED)
   
   3. TRUNK PANEL.   (INCLUDED)
   
   4. TWO QUARTER PANELS AND THE SIDE, ROCKER PANELS ARE MADE INTO THE PANELS. (INCLUDED)
   
   5. TWO OUTER, DOOR PANELS.  (INCLUDED)
   
   6. TWO HEADLIGHT LENSES.  ($250.00 FOR THE PAIR)
   
   7. 2001-2006 CHRYSLER SEBRING TAILLIGHTS. ($360.00 FOR THE PAIR)
   
   8. 2000-2005 MITSUBISHI ECLIPSE, GAS-LID DOOR (EBAY)
   
   9. HEADLIGHT PROJECTOR BULBS. (EBAY)
   
   10. 2006-2007 PONTIAC SOLSTICE FOG LIGHTS (EBAY)
   
   11. FRONT GRILL (CUSTOM, BILLET GRILL  OR EBAY)
   
   12. METAL MESH FOR GRILLS. (EBAY OR PARTS STORE)
   
   13. REAL OR AFTER MARKET WHEELS. (EBAY)
   
   14. NEW TIRES. (ANY LOCAL TIRE DEALER)
   
   15. WHEEL SPACERS. (WWW.WHEELADAPTER.COM
   <http://www.wheeladapter.com/> )
   
   16. "NO DOOR HANDLE" SHAVED DOOR KIT. (EBAY)
   
   17. EUROPEAN TAG AND HOLDER ($50.00 FOR BOTH)
   
   18. WOODEN SHIPPING CRATE. (EXTRA CHARGE)
   
   19.KIT'S SHIPPING FEE. (WWW.FREIGHTQUOTE.COM
   <http://www.freightquote.com/> )
   

CLICK ONCE TO VIEW “SHIPPING THE ASH-MART KIT VIDEO.”

The stock wheelbase of a jag is 101.9” and the wheelbase for the real deal is 105.9”.  You will not have to stretch the donor car.

You will use the stock door shell on the jag, but you will attach it with screws to the kit’s outer body kit door panel.

You will use the jag’s interior with this kit.

Some people add a carbon fiber dash kit off ebay for about $40.00.

Use the jag’s mirrors and door handles.

For the tail lights you can use either a 2002 Sebring convertible tail light at $180.00 each or use factory tail lights at $1000.00 each.

For the front head lights lens use the molded lens we offer at $125.00 each.

This is a beautiful kit car and you will have a  back seat with the finished car because the jag is a four seater car.

The jag’s wipers, convertible or hard top-roof, interior and windshield stay the same.

The average turn-key car is worth $35,000.00 to $50,000.00 and we can teach you how to own a completed car for around $15,000.00. (donor car $5000.00 + kit $9k + paint materials $500.00 + misc. $500.00 = $15k)

A $500.00 deposit payable by paypal or check along with a signed purchase order gets your kit started.  Your kit will then be completed within 30 days.

We can sell you a real European front car tag with a black plastic holder for $50.00 or you can get one on ebay. Some people put this on the front bumper of the completed car.

The entire front clip opens backwards on the finished Ash-Mart replica car like a Corvette.

To hinge and latch the front clip you can attach fiero trunk hinges under the radiator and then use the Jaguar hood latches to keep the front clip closed. You can also cut the fiberglass hood out of the front-clip and install it to the sub-structure of the Jaguar’s hood as shown in the photos that are posted on this website.

For the trunk you will have to cut the Jaguar's trunk lid a little on each side to make it shorter and then attach the Ash-Mart kits trunk section to the outside of the Jaguar's trunk lid. You will have a working trunk on the finished project.

NOTICE: The donor car for the Ash-Mart kit can be a 1997-2006 Jaguar Coup or Convertible and the model can be XK, XKR or XK8.

 

THIS IS THE ASH-MART KIT PAINTED BLACK, WITHOUT THE GRILLS, LIGHTS OR NEW WHEELS ADDED.
REAR BUMPER AND TRUNK PANEL FOR ASH-MART KIT	FRONT CLIP FOR ASH-MART KIT
QUARTER PANEL AND DOOR PANEL FOR ASH-MART KIT	SIDE PANELS PREPARED FOR SHIPPING. THE SIZE OF THE PALLET IS   3' X  11' AND IT WEIGHS 35 POUNDS.
Front and rear parts crated for shipping.	Prepared for shipping.
THIS IS THE ASH-MART UNDER CONSTRUCTION. NOTICE HOW THE ASH-MART HOOD WAS CUT OUT OF THE FRONT-CLIP AND ATTACHED TO THE SUB-STRUCTURE OF THE JAGUAR XK8'S HOOD. CLICK-ON EACH PHOTO BELOW TO ENLARGE.

THIS IS THE ACTUAL ASH-MART REPLICA CAR.

Shipping this kit is as easy as 1,2,3:

You will save money by having anything shipped in one crate that is as small
a crate possible.

Here are the three choices to ship the Ash-Mart Kit:

1.Shipped in two crates: the front-clip, door-panels, trunk and rear bumper
parts in a 3' tall x 7' wide x 7' long crate weighing 300 pounds, plus a
second crate which is the side-quarter panels in a 1' tall x 3' wide x 11'
long crate weighing 50 pounds. Note: shippers charge more when you ship in
two crates instead of only one crate.

2. Shipped in one big crate:  the front-clip and the side-quarter panels and
all other body panels in one big 3' x 7' x 11' crate weighing 350 pounds.
Note: shippers charge more for a crate this long.

3. Shipped in one medium sized crate: this is the cheapest way to ship the
ash-mart kit. We cut through the long, side-quarter panel pieces at the
small rocker panel area, in order to make the kit fit into a smaller crate.
You can easily repair the two, cut, rocker-panel pieces when the kit arrives
at your address with some fiberglass and resin.  The front-clip,
side-quarter panels and all other body panels  will then fit into one
medium sized crate that is a 3' x 7' x 7' crate weighing 350 pounds. Call
Dexter at 1-800-323-5441 extension 1214 for a shipping quote. You will need
to give him our address and your address and the size and weight of the
crate and tell him the contents are fiberglass vehicle parts. He will give
you the cheapest shipping quote i have found. I know he can ship this kit to
London for under $700.00. DEXTER WORKS FOR THE FREIGHT QUOTE COMPANY AND THEIR WEBSITE IS WWW.FREIGHTQUOTE.COM

YOU WILL NOT HAVE TO PAY FOR YOUR KIT UNTIL YOU ARRIVE TO PICK-UP YOUR KIT AT OUR FIBERGLASS SHOP. THAT WAY YOU CAN INSPECT THE WORKMANSHIP OF THIS FINE PRODUCT. A PRODUCT THAT WE ARE VERY PROUD TO OFFER AND ONE THAT WE STAND BEHIND WITH A 100% MONEY BACK GUARANTEE. MUCH ENGINEERING AND DESIGN WORKMANSHIP HAS GONE INTO THIS PRODUCT. IT IS LIKE NO OTHER REPLICA KIT OFFERED IN THE WORLD.  MAP QUEST OUR LOCATION AT QUICK CASH CAR KIT INC. 10735 US HIGHWAY 431, ALBERTVILLE AL 35950-0142 OR CALL JACKIE AT 256-891-2030.

-WE ARE NOT AFFILIATED WITH ANY AUTOMOTIVE MANUFACTURER AND WE DO NOT OFFER ANY BADGES, EMBLEMS OR DECALS.
Notice: Our Ash-Mart kit has only recently been released for production. Our
kit was inspired by a 2006 Vanquish S. car. The unfinished black car
photographed above is the actual Ash-Mart kit it has no grill or lights in
it. THE LIGHT BLUE ASH-MART REPLICA CAR PHOTOGRAPHED ABOVE IS
THE EXACT TYPE BODY-KIT YOU WILL RECEIVE. Some of the cars in
the videos are of the real deal and the gray car photographed is the Ford
based replica car version. Our Jaguar based version is easiest replica body
kit to complete.

START LIVING YOUR SUPERCAR REPLICA DREAM TODAY.