For more information about how to complete your kit and many other general topics like Interiors, Head Light,
Door Hinges,
Donor Cars, Etc.
- Click here go to accessories and how to page.
Donor car: '84 and up Fiero, '97 and up Boxster, or '91 and up MR2
Stretch Required.
Buy this kit for only: $ 3995.
Donor car:
A donor car is defined as the car you donate to you Supercar replica project.
For this kit the donor car is the Fiero, Boxster or MR2.
--
THE WHEELBASE FOR THIS BODY KIT IS 105"
Note: Watch all Dee-Low videos to learn how to complete the RAVE-2.
The Dee-Low videos detail how to attach the body-kit, and complete the entire project, and the same techniques will work on many CarKitInc body-kits.
Shipping the RAVE-2:
RAVE-2 SUPERCAR BODY-KIT:
(Available in a Hard Top, No Top, or Removable Top)
$3,995.00 COMPLETE NO TOP VERSION BODY-KIT
LIMITED TIME ONLY: COMPLETE NO TOP VERSION BODY-KIT ONLY $3,995.00!!(REGULAR PRICE: $6,995.00. YOU SAVE $3,000.00 TODAY!)
NOTE: Prior to 2012 the RAVE-2 sold for $11,995.00
FOR A LIMITED TIME THE INTERIOR KIT OR THE REMOVABLE HARD TOP CAN BE ADDED FOR ONLY $495.00 EACH WITH THE PURCHASE OF THE RAVE-2 BODY-KIT.
$1,995.00 COMPLETE 6 PC. INTERIOR KIT (NOW ONLY $495.00)
$995.00 REMOVABLE HARD TOP (NOW ONLY $495.00)
$350.00 LAMBO DOOR HINGES WITH ROLLER PINS
$100.00 GAS LAMBO DOOR SHOCKS X2
$125.00 MR2 DOOR LATCHES AND STRIKERS X2
$100.00 FOR EACH OF THE 4 BLACK GRILL SECTIONS
$200.00 FOR BLACK METAL EXHAUST WITH TIPS
$1,000.00 BLACK OR GRAY REPLICA WHEELS
$350.00 SHIPPING CRATE (3 X 7 X 12 AND 650 POUNDS)
TO ORDER:
SEND $515.00 VIA PAYPAL TO JOHNSON10745@CHARTER.NET AND PUT IN THE PAYPAL SPECIAL MESSAGE WHAT YOU NEED. WE WILL CONFIRM YOUR ORDER VIA EMAIL AND HAVE YOUR ORDER READY WITHIN 2 WEEKS.
Click HERE to view the shipping crate size and weight page.
RAVE-2 FIBERGLASS BODY-KIT 16 PC. PACKAGE $3,995.00 INCLUDES:
-X1 COMPLETE OUTER BODY-KIT = FRONT-CLIP, REAR-CLIP & WINDSHIELD FRAME
-X1 HOOD PANEL
-X2 DOORS (INNER & OUTER PARTS MUST BE FIBERGLASSED TOGETHER)
-X2 DOOR MIRRORS
-X1 LARGE, REAR, HATCH-PANEL
-X1 REAR, HATCH CROSS-BRACE
-X1 SMALL, TRUNK-LID PANEL
-X1 REAR BUMPER, LOWER-VALANCE PANEL
-X2 HUMPS BEHIND EACH SEAT
-X2 REAR TAIL-LIGHT INSERT PANELS
-X2 FRONT HEAD-LIGHT RINGS
NOTE: YOU CAN MAKE YOUR RAVE-2 SUPERCAR A "HARD-TOP VERSION"
BY SIMPLY FIBERGLASSING THE ROOF-TOP TO THE BODY-KIT; HOWEVER,
MOST PEOPLE MAKE THE ROOF-TOP REMOVABLE.
NOTE: ADD $350.00 FOR LAMBO DOOR HINGES WITH ROLLER PINS
NOTE: ADD $150.00 IF YOU WANT X2 MERCY-2 HEAD-RESTS,
SOME PEOPLE LIKE THE MERCY-2 HEAD-RESTS BETTER THAN
THE RAVE-2 HEAD-RESTS.
NOTE: ADD $150.00 IF YOU WANT THE MERCY-4 TAIL-LIGHT
HOUSINGS, SOME PEOPLE FIND IT EASIER TO FIBERGLASS
THE MERCY-4 TAIL-LIGHT HOUSINGS INTO THE RAVE-2
BODY-KIT AND THEN INSTALL THE 2005 NISSAN EXTERRA L.E.D.
TAIL-LIGHTS FOR WORKING, FACTORY TAIL-LIGHTS. THE RAVE-2
TAIL-LIGHT INSERTS REQUIRE YOU TO INSTALL SEVERAL RED
L.E.D. BULDS (YOU CAN GET FROM EBAY) AND THEN ADD A PLEXI-GLASS COVER OVER THE TAIL-LIGHT INSERT TO COMPLETE THE RAVE-2 TAIL-LIGHTS.
NOTE: TO PLACE AN ORDER FOR A RAVE-2 SUPERCAR, BODY-KIT SIMPLY SEND $515.00 TO PAYPAL JOHNSON10745@CHARTER.NET AND PUT IN THE PAYPAL MESSAGE BOX WHAT YOU NEED. WE WILL EMAIL YOU AN INVOICE FOR YOU TO REVIEW IN ORDER TO CONFIRM YOUR ORDER OR YOU CAN SIMPLY CALL US AT 256-891-2030 WITH A DEBIT OR CREDIT CARD.
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS.
NOTE: ALL YOU ACTUALLY NEED FROM CARKITINC TO COMPLETE THE RAVE-2 NO TOP VERSION IS THE EXTERIOR BODY-KIT, AND THEN USE THE DASH, CONSOLE, AND SEATS FROM YOUR DONOR CAR. REMEMBER TO KEEP IT SIMPLE WITH A NO TOP VERSION YOU'RE NOT REQUIRED TO HAVE DOOR GLASS, A/C, WIPER BLADE, DOOR POPPERS, POWER DOOR MIRRORS, AND BY NOT HAVING TO COMPLETE THESE FEATURES IT MAKES YOUR SUPERCAR PROJECT MUCH QUICKER AND MORE SIMPLE TO COMPLETE.
Rave-2 Orange Fiberglass Body-Kit Molds:
Mercy-2 H.T., Mercy-4, CO-2, Ash-Mart, and RAVE-2:
RAVE-2 Replica Wheels:
Zinik Z28
18"
Bolt Pattern: 5 X 114 offset of 45 2 Colors available: Silver or Black
Note: These replica wheels are 8" wide. You could have the wheels widened and there are companies that do that. Click on the accessories tab under "wheels" to see a wheel widening company.
We have no personal experience at CarKitInc with widening wheels however we have heard of people that have done it.
You can add a set of these replica wheels to your RAVE-2 order for only $1000.00(for a set of 4)
Note: You can leave the wheels at 8" wide and the side view of your completed RAVE-2 Supercar will still look amazing. Also the front view will look correct. It's only the rear view of your RAVE-2 Supercar that you will notice the rear tires are 8" wide instead of 12"-14" wide.
The 4 pictures above are for informational purposes only.
NOTE: THE CHEAPEST WAY TO OWN A RAVE-2 SUPERCAR IS BY USING THIS SUGGESTION. ALL YOU REALLY NEED TO GET ROLLING IS THE NO-TOP VERSION BODY-KIT AND A DONOR CAR. YOU CAN ONLY ADD THE WINDSHIELD AND GET THE LIGHTS WORKING TO BE ROAD SAFE FOR STARTERS. YOU CAN ALWAYS GET YOUR LAMBO DOORS WORKING LATER ASWELL AS ADD ANY OTHER UPGRADE YOU DESIRE.
NOTE: THE RAVE-2 IS DESIGNED FOR A 105 WHEELBASE DONOR CAR AND ANY FIERO, MR2 OR PORSCHE BOXTER OR TUBULAR CHASSIS CAN BE USED.
NOTE: THE WINDSHIELD IS FROM A 1996 HONDA ACCORD AND DOES NOT REQUIRE TRIMMING OR CUTTING. THE DOOR GLASS IS FROM A 1993 TWO DOOR SATURN. THE HEADLIGHTS USE A P1 PROJECTOR BULB. THE HEADLIGHTS AND TAIL LIGHTS USE L.E.D. BULBS FROM EBAY AND A CONTROL MODULE FROM EBAY OR RADIO SHACK. YOU CAN ALSO USE A 2010 CHEV. CAMARO BLINKER LIGHT FLASHER SO THE L.E.D. LIGHTS LIGHT UP AND STROBE/ROTATE JUST LIKE THE REAL SUPERCAR DOES.
NOTE: THE INTERIOR KIT IS 10 PIECES (DASH, CENTER CONSOLE, 4 PC. INNER DOOR PANELS, 2 HEAD-RESTS TO ADD ONTO YOUR SEATS, 2 HUMPS THAT GO BEHIND THE HEAD-REST AREA)
NOTE: FOR THE FRONT AND REAR LENSES YOU CAN TRIM TO FIT LEXSAN OR PLEXI-GLASS. ALSO SOME PEOPLE USE 2006 CADILLAC DTS TAIL LIGHTS AND FIBERGLASS THEM INTO PLACE. ALSO YOU CAN SIMPLY GLOSS BLACK THE GRILL MESH AREAS TO SAVE TIME AND MONEY.
NOTE: THE COMPLETE NO TOP VERSION BODY-KIT IS MADE UP OF ALL EXTERIOR FIBERGLASS LIKE: HOOD, REAR HATCH, REAR TRUNK, CROSS OVER BRACE FOR REAR HATCH, TAIL LIGHT HOUSINGS, REAR BUMPER, X2 REAR HUMPS THAT GO BEHIND THE HEAD RESTS, X2 INNER AND OUTER DOOR SKINS AND SHELLS, REAR VIEW DOOR MIRRORS, COMPLETE FRONT-CLIP SECTION AND COMPLETE REAR-CLIP SECTION. ALSO THE FRONT AND REAR-CLIP SECTIONS WILL ARRIVE SEPERATED FOR SHIPPING PURPOSES AND YOU CAN EASILY CONNECT THEM TOGETHER WITH FIBERGLASS WHEN YOU INSTALL THE BODY-KIT ONTO THE DONOR CAR.
NOTE: SOME PEOPLE ENJOY KEEPING THEIR SUPERCAR PROJECT SIMPLE BY HAVING A NO TOP VERSION SUPERCAR WHICH DOES NOT REQUIRE WORKING WINDSHIELD WIPERS, A/C, DOOR GLASS OR A TOP BECAUSE YOU ONLY DRIVE IT ON PRETTY DAYS. YOU CAN ALSO USE YOUR DONOR CARS INTERIOR TO SAVE TIME AND MONEY. REMEMBER KEEP IT SIMPLE AND HAVE FUN!
NOTE: GO TO THE ACCESSORIES PAGE UNDER "STRETCHING THE MR2" TO FIND MORE INFORMATION ABOUT THE MR2 DONOR CAR WHICH IS AVAILABLE IN A TURBO VERSION WITH 200 H.P. STOCK OR YOU CAN ADD UP TO 500 H.P. TO THE MR2 IF YOU HAVE THE TIME AND MONEY TO DO SO. THE MR2 MAKES A VERY "EASY TO COMPLETE" DONOR CAR FOR THE RAVE2 BODY-KIT AND IS A LOT EASIER TO WORK ON THAN THE FIERO.
THE VIDEO BELOW EXPLAINS HOW YOU CAN USE A 1991-1999 TOYOTA MR2 OR MR2 TURBO VERSION AS A DONOR CAR FOR A SUPERCAR-REPLICA RAVE-2 BODY-KIT. THE CAR HAS 200 H.P. AND A 5 LUG WHEEL BOLT-PATTERN AND A USABLE INTERIOR DESIGN PATTERN. THIS VIDEO SHOWS HOW THE MR2 IS STRIPPED AND THE METAL TOP IS CUT OFF BEFORE THE FLOORPAN IS STRETCHED 10.5" TO MAKE THE WHEELBASE LONGER.
NOTICE: THE RAVE-2 REQUIRES EXTRA BODY-WORK.
CAR KIT INC. BOUGHT THE FIBERGLASS MOLDS FOR THE RAVE-2 FROM ANOTHER FIBERGLASS COMPANY THAT WENT OUT OF BUSINESS.
THE FIBERGLASS COMPANY THAT WENT OUT OF BUSINESS WAS SELLING THE RAVE-2 FOR $11,995.00.
THE RAVE-2 FIBERGLASS MOLDS MAKE A GOOD, SOLID BODY-KIT; HOWEVER BECAUSE THE FIBERGLASS MOLDS ARE A LITTLE ROUGH THE RAVE-2 BODY-KIT REQUIRES MORE SANDING AND BODY-WORK THAN OUR OTHER BODY-KITS DO.
THEREFORE, BEFORE YOU CAN DO THE PAINT FINISH ON YOUR COMPLETED RAVE-2 VEHICLE YOU WILL NEED TO SAND, GRIND AND USE SOME BODY-FILLER IN PLACES IN ORDER TO MAKE THE BODY-KIT AS SMOOTH AND SLICK AS A BOWLING BALL.
CARKITINC DISCOUNTED THE RAVE-2 BODY KIT BY 50% FROM THE $11,995.00 PRICE DUE TO THE EXTRA BODY WORK THAT WILL BE REQUIRED TO COMPLETE IT.
YOU MAY BE ABLE TO GET THE EXTRA BODY WORK DONE FOR $500.00 TO $1,500.00 DEPENDING ON WHERE YOU LIVE OR YOU MAY WANT TO DO THE EXTRA SANDING YOURSELF.
WE SIMPLY WANT TO SALE QUALITY, SUPERCAR BODY-KITS AT THE BEST PRICES.
WE PROMISE YOU THAT YOU WILL ENJOY DRIVING YOUR RAVE-2 SUPERCAR.
AGAIN THE RAVE-2 IS A GREAT, STRONG, SOLID BODY-KIT THAT LOOKS GREAT WITH ALL PIECES FITTING TOGETHER AS THEY SHOULD AND THE SURFACE DEFECTS DUE TO THE ROUGH FIBERGLASS MOLDS CAN EASILY BE CORRECTED WITH SOME BODY WORK. NOTE: IF YOU WANT A SMOOTH, SLICK BODY-KIT THAT REQUIRES LITTLE SANDING CONSIDER BUYING THE MERCY-4.
The photos below are examples of how you can take metal mesh and some small angle iron and make the grills and exhaust for the RAVE-2.
