Stretch Required: Cutting the donor car in half, to make it longer so the body-kit fits.
No Stretch Required: The body kit bolts on to the donor car as is.
Donor car:'84-'88 Fiero
Includes:9 section body kit.
Buy this kit for only: $ 2495.
A donor car is defined as the car you donate to you Supercar replica project.
For this kit the donor car fit a 1984-1988 Pontiac Fiero.
To pull up all the YouTube videos on any given body-kit that you are interested in search these words on YouTube; for example: CarKitInc Mercy-2 or CarKitInc Ash-Mart or CarKitInc Mercy-1, basically just add what you are searching for after the tag “CarKitInc”.
Click HERE to view the shipping crate size and weight page.
A 12" Stretch is required to install the GT-1 body-kit on the Fiero.
KIT GT-1 PACKAGE #1 IS ON SALE FOR A LIMITED TIME.
TO ORDER THIS KIT SIMPLY SEND $515.00 TO PAYPAL E-MAIL ADDRESS JOHNSONCASH1@GMAIL.COM AND PUT IN THE SPECIAL MESSAGE EXACTLY WHAT YOU NEED.
WE WILL SEND YOU A CONFIRMATION E-MAIL CONFIRMING YOUR DEPOSIT WAS RECEIVED WITH AN INVOICE.
(Click to enlare)
Shipping the GT-1 video:
The yellow car above and the silver car below are the GT-1 version that goes on a Fiero. The GT-1 version has fog
lights and distinctive, rear-view, side mirrors and a longer wheelbase than the GT-2 version. The wheels are replica PORSCHE CARRERA GT WHEELS THAT YOU CAN BUY ON eBay.
NOTE: ALL 6 PHOTOS ABOVE ARE OF A REAL PORSCHE CARRERA GT
CLICK ANY WHITE "SHOW BUTTON" TO THE RIGHT TO VIEW ANY ONE TOPIC BELOW
*LIST OF THE PARTS THAT MAKE UP THE GT-1 BODY-KIT WITH THE EXTRAS:
FRONT-CLIP THAT HAS THE BUMPER, FENDERS AND HEADLIGHT HOUSINGS MADE
INTO IT. (NOTE: THIS IS INCLUDED IN THE GT-1 KIT PURCHASE
ALONG WITH THE OTHER ITEMS MARKED INCLUDED.)
TWO-PART, TRUNK PANEL. (INCLUDED)
REAR-CLIP THAT HAS THE REAR BUMPER AND TWO QUARTER PANELS AND SIDE,
ROCKER PANELS MADE INTO IT. (INCLUDED)
TWO OUTER, DOOR PANELS. (INCLUDED)
ONE GT-1 REMOVABLE HARD-TOP. (INCLUDED)
ONE REAR-SPOILER. (INCLUDED)
3 PIECE CENTER-CONSOLE. (INCLUDED)
3 PIECE DASH. (INCLUDED)
2 REAR-VIEW, MIRROR HOUSINGS. (INCLUDED)
TWO-PART, HOOD PANEL. (INCLUDED)
TWO HEADLIGHT LENSES. ($250.00 FOR THE PAIR)
TWO TAILLIGHT LENSES. (RED OR CLEAR) ($250.00 FOR THE PAIR)
HEADLIGHT PROJECTOR BULBS. (EBAY)
METAL MESH FOR GRILLS. (EBAY OR PARTS STORE)
REAL OR AFTER-MARKET WHEELS. (EBAY)
NEW TIRES. (ANY LOCAL TIRE DEALER)
NO DOOR HANDLE SHAVED DOOR KIT. (EBAY) (NOTE: ALSO KNOWN AS A DOOR POPPER.)
EUROPEAN TAG AND HOLDER ($50.00 FOR BOTH)
WOODEN SHIPPING CRATE. 11.5'' X 7'' X 3'' ($250.00 FOR THE CRATE)
KIT'S SHIPPING FEE. (WWW.FREIGHTQUOTE.COM) OR (WWW.ECHO.COM)
WHEELBASE NOTES: The wheelbase on the real deal is 107.5''.
The wheelbase of the Fiero after you stretch the car 12" will be 105.4'' which is only 2.1'' shorter than the real deal.
The wheelbase factor on the GT1 kit is its primary advantage, because
you end up with a longer wheelbase car than the GT2 version. The GT1 version is very close to the real
The photo of the modified Fiero donor car with the orange front bumper
is an example of how you can support the fiberglass replica kit on the
donor car by welding tubular steel as the support frames for the
kit. This car photoed above was used for the DEE-LOW kit.
GT1 front-clip molds that make the kit
GT1 side shot photo of molds that make the kit.
GT1 rear-clip molds that make the kit.
GT1 interior molds that make the interior kit.
WOODEN SHIPPING CRATE
GT1 REAR-CLIP SECTION
GT1 INNER-HOOD PANEL
GT1 REAR CLIP SECTION
GT1 INNER-HATCH PANEL
GT1 REMOVABLE HARD-TOP
FRONT AND REAR LENSES
NOTE: TURN ANY FIERO INTO A GT1 SUPERCAR-replica WITH THE GT1 BODY-KIT.
NOTE: Only clear front and clear rear lenses come with the “GT-1 PACKAGE #1 offer.” which can be tinted with medium to dark black or red window tint if you so desire. However, if you require solid red lenses for the rear then you may purchase them as a “special order” for only $300.00 per set.
This GT # 1. Kit can be installed on a 1984-1988 pontiac fiero.
These kits come with a removable hard-top only.
suggest the donor car be slightly damaged because the sheet metal will
not be used on the finished kit and you will save a lot of money by
using a damaged donor car. All unused body parts can be resold as
scrap or on ebay as reusable body parts.
There is no additional metal work required for the fiero after you stretch the body of the donor car.
You will keep the factory windshield on the Fiero, donor car for your GT1 replica car.
for the GT #1. Kit that goes on a fiero you will also receive a 6 pc.
Set interior kit. The console is 3 pieces and the dash is made up of 2
pieces which is the big dash and a glove box, you will use the fiero
seats, also there is fiberglass piece for the steering wheel to make it
look like it has an airbag.
The fiero doors will be used and
you will screw an outer body kit panel on the doors to make the doors
look like the finished gt kit. The hood is made up of two pieces an
outer and an inner panel and it will go on the fiero body.
interior at any upholstery shop by making the center part of the seats
and the top insert parts of the door panels the same color as the
finished car or leave the interior one color.
Some people add a carbon fiber dash kit off ebay to the donor for about $40.00.
average turn-key car is worth $25,000.00 to $40,000.00 and we can teach
you how to own a completed car for around $10,000.00. (fiero donor car
$1,000.00 + kit $3,500.00 + wheels and tires $2,000.00 + spacers $400.00 + paint
materials $500.00 + misc. $500.00 = $7,900.00)
deposit payable by paypal or check along with a signed purchase order
gets your kit started. Your kit will then be completed within 30
days. Call for details.
We can sell you a real European front
car tag with a black plastic holder for $50.00 or you can get one on
ebay. Some people put this on the front bumper of the completed car.
GT1 kit comes in two versions. The first version has the hood and trunk
lid that looks like the GT2 version. For $250.00 more you can get the
GT1-HUMPED version and that means that the hood and the trunk will have
the big, aero-dynamic looking humps on the hood and the trunk. See the
yellow car photos of the GT1-HUMPED version on this web site.
This is a steering wheel cover that is included in the kit.