For more information about how to complete your kit and many other general topics like Interiors, Head Light, Door Hinges, Donor Cars, Etc. - Click here go to accessories and how to page.

ASH-MART PACKAGE #1
IS ON SALE FOR A LIMITED TIME.

1. ASH-MART BODY KIT $3,995.00
2. FRONT LENSES $250.00
3. SHIPPING CRATE $250.00
4. TOTAL AMOUNT DUE $4,495.00
5. LESS PACKAGE #1 DISCOUNT $1,000.00
6. GRAND TOTAL ONLY $3,495.00

Click the BUY NOW button in order to pay your $500.00 deposit via Paypal plus your $10.00 bank fee for a total of $510.00 also type in the white box below which BODY-KIT you are ordering so it will show up on the Paypal receipt. You will also need to email a request for an invoice for your BODY-KIT order so we can have a clear understanding as to what you specifically need.

---

---

ASH-MART “ACCESSORIES PACKAGE #2”
1. one set of 2 SOLSTICE FOG LIGHTS $175.00 for 2 lights
2. one ECLIPSE gas lid/fuel door $175.00
3. one set 80 lb. door poppers w/ 1 electric push button & 1 pull cable $200.00
4. two sets P1-PROJECTOR HEADLIGHT BULBS in blue 4 bulbs $200.00
5. one EUROPEAN TAG with black plastic TAG HOLDER $50.00
6. one set CHRYSLER SEBRING TAIL LIGHTS 2 REAR LIGHTS $400.00
*TOTAL FOR ASH-MART “ACCESSORIES PACKAGE #2” EQUALS $1,200.00

The video below explains about the ASH-MART "ACCESSORIES PACKAGE #2"




The picture above shows(in order from top):
Fog lights
Gas lid
Door poppers
P-1 Projector bulbs
European tag and tag holder
Sebring tail lights

CLICK ANY WHITE "SHOW BUTTON" TO THE RIGHT TO VIEW ANY ONE TOPIC BELOW	Hide All
ASH-MART fiber glass images:	Show
THE CAR ABOVE IS THE ASH-MART KIT PAINTED BLACK, WITHOUT THE GRILLS, LIGHTS OR NEW WHEELS ADDED. REAR BUMPER AND TRUNK PANEL FOR ASH-MART KIT SIDE PANELS PREPARED FOR SHIPPING. THE SIZE OF THE PALLET IS 3' X 11' AND IT WEIGHS 35 POUNDS. FRONT CLIP FOR ASH-MART KIT Front and rear parts crated for shipping. Prepared for shipping. QUARTER PANEL AND DOOR PANEL FOR ASH-MART KIT Front clip German Tag Shipping Crate Rear Bumper Rear Decklid Sebring Convertible tail lights Rocker and Quarter Panel Front headlight lenses
ASH-MART UNDER CONSTRUCTION.:	Show
NOTICE HOW THE ASH-MART HOOD WAS CUT OUT OF THE FRONT-CLIP AND ATTACHED TO THE SUB-STRUCTURE OF THE JAGUAR XK8'S HOOD.(click the pictures below to enlarge) This video shows the buidling process:
THE ACTUAL ASH-MART REPLICA CAR IMAGES.:	Show
THE IMAGES BELOW WERE PROVIDED BY ONE OF OUR CUSTOMERS.
*LIST OF THE PARTS THAT MAKE UP THE ASH-MART BODY-KIT WITH THE EXTRAS:	Show
1. FRONT-CLIP THAT HAS THE HOOD, BUMPER, FENDERS AND HEADLIGHT HOUSINGS MADE INTO IT. (THIS IS "INCLUDED" IN THE ASH-MART KIT PURCHASE ALONG WITH THE OTHER ITEMS MARKED "INCLUDED.") 2. BACK BUMPER. (INCLUDED) 3. TRUNK PANEL. (INCLUDED) 4. TWO QUARTER PANELS AND THE SIDE, ROCKER PANELS ARE MADE INTO THE PANELS. (INCLUDED) 5. TWO OUTER, DOOR PANELS. (INCLUDED) 6. TWO HEADLIGHT LENSES. ($250.00 FOR THE PAIR) 7. 2001-2006 CHRYSLER SEBRING TAILLIGHTS. ($360.00 FOR THE PAIR) 8. 2000-2005 MITSUBISHI ECLIPSE, GAS-LID DOOR (EBAY) NOTE: For the gas lid door search eBay for a 2000-2005 Eclipse fuel door, also search for an Eclipse gas lid, because some people call it one of two different names. A 2006 and up Eclipse gas lid will not work because the word “Eclipse” is stamped into the metal gas lid on those year models. 9. HEADLIGHT PROJECTOR BULBS. (EBAY) 10. 2006-2007 PONTIAC SOLSTICE FOG LIGHTS (EBAY) 11. FRONT GRILL (CUSTOM, BILLET GRILL OR EBAY) Mr. Grill produces custom billet grills in California if you have a question call them at (951-279-4360) or email them at (sales@mrgrille.com). Ask for a standard, black finish grill. 12. METAL MESH FOR GRILLS. (EBAY OR PARTS STORE) 13. REAL OR AFTER MARKET WHEELS. (EBAY) 14. NEW TIRES. (ANY LOCAL TIRE DEALER) 15. WHEEL SPACERS. (WWW.WHEELADAPTER.COM) 16. "NO DOOR HANDLE" SHAVED DOOR KIT. (EBAY) 17. EUROPEAN TAG AND HOLDER ($50.00 FOR BOTH) 18. WOODEN SHIPPING CRATE. (EXTRA CHARGE) 19.KIT'S SHIPPING FEE. (WWW.FREIGHTQUOTE.COM)

We suggest the donor be slightly damaged because the sheet metal will not be used on the finished car and you will save a lot of money by using a damaged donor car. All unused body parts can be resold as scrap or on ebay as reusable body parts. We bid on slightly damaged donor cars that you have picked out at either copart.com or IAAI.com auto auctions.


The stock wheelbase of a Jaguar is 101.9'' and the wheelbase for the real deal is 105.9'' you will not have to stretch the donor car.

You will use the stock door shell on the Jaguar, but you will attach it with screws to the kit's outer body kit door panel.

You will use the Jaguar's interior with this kit.

Some people add a carbon fiber dash kit off ebay for about $40.00.

Use the Jaguar's mirrors and door handles.

For the tail lights you can use either a 2001-2006 Sebring convertible tail light at $180.00 each or use factory tail lights at $1000.00 each.

For the front head lights lenses use the molded lens we offer at $125.00 each, which is $250.00 a set.

This is a beautiful kit car and you will have a back seat with the finished car because the Jaguar is a four seater car.

The Jaguar's wipers, convertible or hard top-roof, interior and windshield stay the same.

The average turn-key car is worth $35,000.00 to $50,000.00 and we can teach you how to own a completed car for around $10,000.00. (donor car $5000.00 + kit $4k + paint materials $500.00 + misc. $500.00 = $10k)

A $500.00 deposit payable by paypal or check or credit card gets your kit started. Your kit will then be completed within 30 days.

We can sell you a real European front car tag with a black plastic holder for $50.00 or you can get one on eBay. Some people put this tag on the front bumper of the completed car.

The entire front clip opens backwards on the finished Ash-Mart replica car like a Corvette or you can cut the hood out and hinge the hood to open like the Jaguar.

To hinge and latch the front clip you can attach Fiero trunk hinges under the radiator and then use the Jaguar hood latches to keep the front clip closed. You can also cut the fiberglass hood out of the front-clip and install it to the sub-structure of the Jaguar's hood as shown in the photos that are posted on this website.

For the trunk you will have to cut the Jaguar's trunk lid a little on each side to make it shorter and then attach the Ash-Mart kits trunk section to the outside of the Jaguar's trunk lid. You will have a working trunk on the finished project.

NOTICE: The donor car for the Ash-Mart kit can be a 1997-2006 Jaguar Coup or Convertible and the model can be XK, XKR or XK8.

HEAD LIGHTS: For the Ash-Mart head lights, you will need to buy the front lens from us at $125.00 each and then buy the projector, head light, bulbs from any auto parts store or eBay. The head light housing section will come made into the Ash-Mart body-kit and you will simply install the bulbs and lens in order to complete the head lights for the vehicle. NOTE:See head lights installed video on accessories page
TRUNK LID: When you install the rear, kit, trunk section you will need to cut the Jaguar's metal, trunk lid a little bit because the Ash-Mart trunk is not as big as the Jaguar. This trunk piece installation process will make more sense when you see the Jaguar with the kit's trunk piece laid next to it.	We sale each lens for $125.00 each.
QUARTER PANELS: When you install the rear, quarter panel, kit sections you will only take off the back-half of the rear, quarter panel, outer, sheet-metal-skin, sections from the Jaguar. All of this will make more sense when you see the kit's parts laid next to the Jaguar.
FOG LIGHTS: For the fog lights use factory, fog-driving lights or use 2004-2006 Pontiac grand prix or 2006-2007 Pontiac solstice factory fog lights. The grand prix and the solstice are exactly the same fog light. You will have to do a little fiberglass work to make the Pontiac fog lights work, but they will save you money. You can find a new pair on Ebay for around $59.00 per pair. Note: see photo of Pontiac lights below.	2006-2007 Pontiac Solstice fog lights
TAIL LIGHTS: If you use the 2001 - 2006 Chrysler Sebring convertible tail lights you will have to do a little fiberglass work to make them fit but the required modifications will be minor.	We offer these 2001 - 2006 Chrysler Sebring convertible taillights for $360.00 a pair.
GAS DOOR LID: For the gas door lid use a 2000-2005 Mitsubishi Eclipse alloy, gas door lid for around $49.00. A new gas, door lid is $1,504.00.	2000-2005 Mitsubishi Eclipse Alloy fuel door
DONOR CAR MODELS: A Jaguar XK or XKR or a XK8 will work as a donor car for this kit because they are all the same body style. The only difference is the different engine features each of the three models offer. The XK has the 3.2 liter motor and the XK8 has the 4 liter motor and the XKR has the 4 liter motor that also comes with a super-charger on the motor. The XK8 is the most common jaguar people use with this Supercar replica kit and the XK8 is also the easiest model to locate for purchase.
WHEEL SPACERS: You will have to add wheel spacers to the Jaguar because the Ash-Mart kit is wider than the Jaguar. The thickness of your wheel spacers will be determined by the type of wheels you decide to install on your finished Ash-Mart Supercar replica. For example a deep dish wheel will require a different wheel spacer than a standard wheel.
ASH-MART GRILL: MR. DAVE VANZANT IS THE OWNER OF "MR. GRILL COMPANY" IN CALIFORNIA. HIS WEB SITE IS WWW.MRGRILLE.COM AND THEY MAKE CUSTOM, BILLET GRILLS.