For more information about how to complete your kit and many other general topics like Interiors, Head Light,
Door Hinges,
Donor Cars, Etc.
- Click here go to accessories and how to page.
ON SALE
Turn any mid-engine, stretched car into a MERCY-1.
Donor car is FIERO, BOXSTER or MR2.
Buy this kit for only: $ 3995.
MERCY-1.This kit includes the 6 section body-kit and the interior kit. You buy the donor car, wheels, glass, lights and have the interior upholstered.
Donor car:
A donor car is defined as the car you donate to you Supercar replica project.
For this kit the donor car is any Pontiac Fiero, '97-'04 Porsche Boxster or '91-'95 Toyota MR2.
--
WE OFFER THESE ADDITIONAL MERCY ITEMS KNOWN AS
“MERCY ACCESSORIES PACKAGE #2 AND #1.” FOR PEOPLE THAT DO NOT WANT TO HAVE TO SHOP ON EBAY OR GO TO SALVAGE YARDS FOR THESE PARTS:
“MERCY ACCESSORIES PACKAGE #2.”:
“MERCY-1 BODY-KIT WITH INTERIOR KIT AND WITH MERCY-1 ACCESSORIES PACKAGE #1. WHICH IS SALE #103 IS $4,250.00”:
*NOTE 1: YOU MAY WANT TO ADD THE FOLLOWING ACCESSORIES TO YOUR ORDER AT ADDITIONAL COSTS:
-1 SET P6 LARGE PROJECTOR BULBS FOR HEAD-LIGHTS $125.
-A LARGE REAR SPOILER-WING FOR $300.00 (SEE YELLOW CAR ON MERCY-1 PAGE FOR PHOTO) OR...
-1 SET P1 SMALL PROJECTOR BULBS IN BLUE FOR
HEAD-LIGHTS $100.
-A REPLICA MOTOR COVER FOR $450.00
(SEE MERCY-1 PAGE) OR..
-1 SET 80 POUND DOOR POPPERS WITH 2 ELECTRIC PUSH BUTTONS AND 2 PULL CABLES $200.
THE HAND-HELD
-A FIERO HEADREST ATTACHMENT SET $100.00 FOR BOTH (SEE MERCY-1 PAGE) OR...
-REMOTE BUTTON WILL OPEN DOORS FROM OUTSIDE AND THE PUSH BUTTONS WILL OPEN DOORS FROM INSIDE AND...
-MERCY-1 RUBY RED TAIL LIGHT LENSES SET FOR $250.00(SEE ACCESSORIES PAGE)
-1 SET FIERO HEADRESTS $100. WE SUGGEST YOU USE FIERO SEATS FOR MERCY 1 OR 2 OR 4 BODY-KITS AND INSTALL THESE HEADRESTS ON FIERO SEAT-FRAMES AND THEN HAVE FIERO SEATS UPHOLSTERED.
-THE INNER SIDE PANEL SECTIONS THAT GO BETWEEN THE SEAT AND THE DOOR $150.00 FOR BOTH SIDES (SEE MERCY-1 PAGE) OR...
-2 SETS OF THE MITSUBISHI 3000GT HOOD HINGES
(2 FOR HOOD AND 2 FOR REAR-HATCH) $100.
-IF YOU BUY THE MERCY-1 N.T. (NO TOP) VERSION YOU MAY WANT THE MERCY-1 N.T. RAIN COVER FOR $200.00 WHICH IS FOR STORING YOUR CAR OUTSIDE. (SEE MERCY-2 PAGE FOR PHOTO)
-2 SETS MERCEDES w126 style DOOR LATCHES AND LATCH-STRIKER/RECEIVERS $200.
-NOTE 2: THE MOST POPULAR VERSION OF THIS BODY-KIT IS THE “MERCY-1 R.T. PACKAGE #1” $4,250.00 AND...
-1 EUROPEAN TAG AND PLASTIC TAG HOLDER FOR FRONT BUMPER $50.
-THEN ADD THE MOTOR COVER AT $450.00 AND...
-THE PULL CABLES WILL OPEN DOORS IN CASE THE BATTERY IS DEAD ON THE VEHICLE.
-THE FIERO HEADRESTS AT $100.00 AND THE INNER SIDE PANELS AT $150.00
-4 L.E.D. RED, ROUND, BRAKE LIGHTS THAT GO INSIDE THE REAR TAIL LIGHT FIBERGLASS HOUSINGS $125.
-2 SMALL, FRONT BLINKER LIGHTS THAT GO INSIDE HEADLIGHT HOUSINGS $25.
TOTAL FOR MERCY PACKAGE #2 IS $1,025.00
$1,025.00 MERCY ACCESSORIES PACKAGE #2
TOTAL FOR MERCY-1 BODY-KIT WITH INTERIOR KIT AND WITH MERCY-1 ACCESSORIES PACKAGE #1 WHICH IS SALE #103 IS $4,250.0
MERCY-1 INTERIOR KIT BY ITSELF: $1,250
CLICK ANY WHITE "SHOW BUTTON" OR IMAGE TO DIPLAY TOPIC BELOW
IMAGES
VIDEOS
EXTRA PARTS YOU NEED TO BUY
DONOR CAR INFOMATION
LIMITED TIME OFFERT
ON SALE #103 FOR ONLY $4,250.00
PACKEGES YOU CAN ADD
MERCY-1 VS MERCY 2
SHIPPING INFOMATION
HideAll
MERCY-1 VERSES MERCY-2
*NOTE: The MERCY-1 is a 1999 body style and the MERCY-2 is a 2007 body style.
*NOTE: YOU CAN READ THE MERCY-1 AND MERCY-2 PAGES ON THIS WEBSITE AND WATCH THE VIDEOS TO LEARN HOW TO STRETCH THE DONOR CAR AND WHAT OTHER SUPPLIES AND ACCESSORIES ARE NEEDED TO COMPLETE YOUR PROJECT FOR EXAMPLE THE WINDSHIELD IS FROM A 1996 NISSAN MAXIMA AND IT COSTS AROUND $100.00 BUT YOU WILL HAVE TO TRIM THE EDGES OF THE WINDSHIELD WITH A GLASS CUTTER TO MAKE IT FIT THE MERCY-1 WINDSHIELD FRAME.
*NOTE: WE RECOMMEND YOU BUY FROM EBAY AND INSTALL A PIONEER AVH-P3100DVD 5.8” LCD STEREO IN YOUR CAR FOR AROUND $300.00. THE TOUCH-SCREEN MAKES THE DASH LOOK LIKE A NEW MODEL VEHICLE.
MERCY-1 ACCESSORIES PACKAGE #1. AND OTHER OPTIONS:
“MERCY ACCESSORIES PACKAGE #2.”:
“MERCY-1 BODY-KIT WITH INTERIOR KIT AND WITH MERCY-1 ACCESSORIES PACKAGE #1. WHICH IS SALE #103 IS $4,250.00”:
*NOTE 1: YOU MAY WANT TO ADD THE FOLLOWING ACCESSORIES TO YOUR ORDER AT ADDITIONAL COSTS:
-1 SET P6 LARGE PROJECTOR BULBS FOR HEAD-LIGHTS $125.
-A LARGE REAR SPOILER-WING FOR $300.00 (SEE YELLOW CAR ON MERCY-1 PAGE FOR PHOTO) OR...
-1 SET P1 SMALL PROJECTOR BULBS IN BLUE FOR
HEAD-LIGHTS $100.
-A REPLICA MOTOR COVER FOR $450.00
(SEE MERCY-1 PAGE) OR..
-1 SET 80 POUND DOOR POPPERS WITH 2 ELECTRIC PUSH BUTTONS AND 2 PULL CABLES $200.
THE HAND-HELD
-A FIERO HEADREST ATTACHMENT SET $100.00 FOR BOTH (SEE MERCY-1 PAGE) OR...
-REMOTE BUTTON WILL OPEN DOORS FROM OUTSIDE AND THE PUSH BUTTONS WILL OPEN DOORS FROM INSIDE AND...
-MERCY-1 RUBY RED TAIL LIGHT LENSES SET FOR $250.00(SEE ACCESSORIES PAGE)
-1 SET FIERO HEADRESTS $100. WE SUGGEST YOU USE FIERO SEATS FOR MERCY 1 OR 2 OR 4 BODY-KITS AND INSTALL THESE HEADRESTS ON FIERO SEAT-FRAMES AND THEN HAVE FIERO SEATS UPHOLSTERED.
-THE INNER SIDE PANEL SECTIONS THAT GO BETWEEN THE SEAT AND THE DOOR $150.00 FOR BOTH SIDES (SEE MERCY-1 PAGE) OR...
-2 SETS OF THE MITSUBISHI 3000GT HOOD HINGES
(2 FOR HOOD AND 2 FOR REAR-HATCH) $100.
-IF YOU BUY THE MERCY-1 N.T. (NO TOP) VERSION YOU MAY WANT THE MERCY-1 N.T. RAIN COVER FOR $200.00 WHICH IS FOR STORING YOUR CAR OUTSIDE. (SEE MERCY-2 PAGE FOR PHOTO)
-2 SETS MERCEDES w126 style DOOR LATCHES AND LATCH-STRIKER/RECEIVERS $200.
-NOTE 2: THE MOST POPULAR VERSION OF THIS BODY-KIT IS THE “MERCY-1 R.T. PACKAGE #1” $4,250.00 AND...
-1 EUROPEAN TAG AND PLASTIC TAG HOLDER FOR FRONT BUMPER $50.
-THEN ADD THE MOTOR COVER AT $450.00 AND...
-THE PULL CABLES WILL OPEN DOORS IN CASE THE BATTERY IS DEAD ON THE VEHICLE.
-THE FIERO HEADRESTS AT $100.00 AND THE INNER SIDE PANELS AT $150.00
-4 L.E.D. RED, ROUND, BRAKE LIGHTS THAT GO INSIDE THE REAR TAIL LIGHT FIBERGLASS HOUSINGS $125.
-2 SMALL, FRONT BLINKER LIGHTS THAT GO INSIDE HEADLIGHT HOUSINGS $25.
TOTAL FOR MERCY PACKAGE #2 IS $1,025.00
$1,025.00 MERCY ACCESSORIES PACKAGE #2
TOTAL FOR MERCY-1 BODY-KIT WITH INTERIOR KIT AND WITH MERCY-1 ACCESSORIES PACKAGE #1 WHICH IS SALE #103 IS $4,250.0
MERCY-1 INTERIOR KIT BY ITSELF: $1,250
These pictures are for informational purposes only and are of a finished MERCY-1 H.T.
This photo shows a black MERCY-1 N.T. We suggest the front suspension be lowered by 3" on this car and the Camaro wheels be replcaed with real lambo wheels and the seats get the lambo headrest attachment we offer for $100.00 and the pleated seats get redone in 2 1/2" diamond square stiching with gray threading since the car is black on black. We also suggest the radio be replaced with a pioneer 5" touch screen stereo & a $75.00 steering wheel cover be bought from us which makes the car to appear to have an airbag. The center console & armrest and door panels also needs 2 1/2" diamond squares.
This is a 10 piece fiberglass V12 lambo replica motor cover kit.
It is designed to be painted and used with any replica car or kit car project like the Pontianc Fiero donor car.
You will recieve the 10 piece kit in the photo that will need to be bolted together and painted, not the completed motor cover.
Again, you will need to paint and assemble the 10 fiberglass pieces that you recieve, but it is very easy to complete.
You will also need to buy a few accessories at a hardware or automotive store, such as the 2, big, black hoses and a few bolts and nuts.
You will love the way this motor cover will make your replica car appear to have a real v12 lambo motor in it.
You will love all the Supercar, replica, fiberglass products we make aswell as our low prices.
*MERCY-1 PACKAGE ACCESSOROES PACKAGE #1. IS CURRENTLY INCLUDED WITH THE PURCHASE OF THE "SIMPLE MERCY-1 PRICING SALE #103" AND THESE ARE THE ITEMS IN THE "PACKAGE #1.":
-2 FRONT HEAD-LIGHT LENSES $250.
-2 REAR TAIL-LIGHT HOUSINGS AND 2 RUBY RED TAIL-LIGHT LENSES $500.
-4 LAMBO DOOR GAS SHOCKS $200.
-2 READY TO INSTALL LAMBO DOOR HINGES WITH THE ROLLER PINS WELDED ONTO THEM $200.
-4 ROUND HEAD-LIGHT RINGS $160.
-1 WOODEN SHIPPING CRATE SIZED (181" X 87" X 45" AND WEIGHT IS 450 POUNDS) $250.
-TOTAL VALUE OF MERCY-1 ACCESSORIES PACKAGE #1. IS $1,560.00 AND CURRENTLY IT IS INCLUDED IN YOUR SALE #103.
*NOTE 3: WE REGULARLY RECEIVE COMPLIMENTS ABOUT THE QUALITY OF OUR FIBERGLASS PRODUCTS AND HOW TRULY EASY THE BODY-KITS ARE TO COMPLETE HOWEVER YOU SHOULD UNDERSTAND THAT SOME SANDING AND BONDOING AND PRIMER WORK MUST BE DONE TO THE BODY-KIT BEFORE IT IS READY TO PAINT.
*NOTE 4: THE FIBERGLASS INTERIOR PANELS FOR THE MERCY-1 BODY-KIT WORKS BEST WHEN COVERED IN BLACK VINYL WITH (BLACK VINYL CARBON FIBER TEXTURED INSERTS IN THE CENTER PART OF THE SEATS AND DOOR PANELS) WITH YELLOW THREADING WHICH CAN GO WITH A YELLOW OR BLACK CAR. (SEE VIDEO FOR MORE DETAILS)
*NOTE 5:The 12 piece interior kit is made up of 3 pieces for each door panel which is a total of 6 pieces for the two doors and 4 pieces for the dash and 2 fiberglass pieces for the console/armrest. (NOTE: For additional information, see the photos that show the completed Mercy-1 interior and also see the photos of the gray, fiberglass interior pieces that make up the interior kit on the Mercy-1 website page.)
NOTE: also go to the accessories tab on the home page then click the interior tab.
*
NOTE 6: THE ORANGE MERCY-1 N.T.(at the top of page) NEEDS THE FRONT-END LOWERED 2” TO MAKE IT LOOK BETTER AND LOWERING IT WOULD GIVE IT A BETTER STANCE. YOU CAN LOWER THE FIERO BY SEACHING THE INTERNET AS TO EXACTLY HOW YOU WANT TO MODIFY THE SUSPENSION UNDER THE CAR WHICH WILL LOWER THE FRONT-END BY ABOUT 2”.
The photo above is a MERCY-1 N.T. Black on Black with front-end suspension lowered AND
2 1/2" diamond sewn squares sewn into the vinyl seats look on any SUPERCAR-replica project.
NOTE: NOTICE HOW MUCH BETTER THE BLACK MERCY-1 N.T. WITH THE DOORS OPEN LOOKS IN THE PHOTO ABOVE
WITH THE FRONT SUSPENSION LOWERED 2" WHICH GIVES IT A BETTER STANCE. NOTICE THE ORANGE CAR HAS NOT BEEN LOWERED.
*NOTE 7: Buying the MERCY-1 is as easy as 1,2,3.
1. You can buy just the fiberglass MERCY-1 body-kit and interior kit for $3,995.00
2. You can buy the MERCY-1 “PACKAGE #1.” which includes the fiberglass MERCY-2 body-kit and interior kit plus the 6 different accessory items which is now ON SALE FOR $4,250.00.
3. You can buy the “MERCY ACCESSORIES PACKAGE #2.” which includes 11 different, additional, accessory items for only $1,250.00
*ALSO NOTE: Simply pay a $500.00 deposit to get any body-kit order started and then pay the balance when we complete your order.
For Only $3,995.00 you can choose
The Mercy 1, Supercar, Replica Kit in one of three versions,
Hard-Top (H.T.) or Removable-Top (R.T.) or
No-Top (N.T.). For $3,995.00 you get the complete exterior body-kit of your choice, and the complete interior fiberglass kit.
If you buy just the MERCY-1, it comes with the body-kit, and interior-kit for $3,995.00
BUT if you buy the MERCY-1 PACKAGE #1 it comes with the body-kit,interior-kit,and all the accessories listed below for $4,250.00.
MERCY-1 Videos:
NEW VIDEOS
STEERING WHEEL COVER REPLICA
TAIL LIGHT HOUSING FOR NISSAN XTERRA TAIL LIGHT
The video below discusses completing the MERCY-1 interior.
The video below talks about the Mercy-1 Fiberglass body kit
The video below also discusses the MERCY-1 fiberglass body-kit
NOTE: If you buy just the MERCY-1, it comes with the body-kit, and interior-kit for $3,995.00
BUT if you buy the MERCY-1 PACKAGE #1 it comes with the body-kit,interior-kit,and all the accessories listed below for about $4,250.00.
The video below talks about shipping the MERCY-1 R.T.:
The video below talks about shipping the MERCY-1 R.T.:
The video below shows the Mercy-1 Interior with diamond tuck stitching
MERCY-1 COMPLETED BODY KIT
*SIMPLE MERCY-1 PRICING SALE #103 FOR ONLY $4,250.00
“MERCY-1 SALE PRICING #103.”
-THE MERCY-1 BODY-KIT IS ON SALE AND THE “MERCY-1 SALE PRICING #103.” IS THE NAME FOR THIS SALE AND THE DETAILS ARE LISTED BELOW:
-TO ORDER A MERCY-1 BODY-KIT SIMPLY DECIDE ON WHICH MERCY-1 KIT YOU WANT AND THE CHOICES ARE REMOVABLE, HARD OR NO-TOP
“R.T. or H.T. or N.T.” AND YOU MAY CHOOSE ANY ONE OF THE 3 VERSIONS FOR ONLY $4,250.00 EACH AND CURRENTLY YOU WILL RECEIVE THE MERCY-1 ACCESSORIES “PACKAGE #1.” FOR FREE WHICH IS WORTH $1,360.00.
-THEN DECIDE IF YOU WANT TO ADD
“ACCESSORIES PACKAGE #2.” TO YOUR ORDER AND ALSO DECIDE IF YOU WANT TO ADD ANY
ADDITIONAL MISCELLANEOUS ACCESSORIES TO YOUR ORDER.
-EMAIL US EXPLAINING WHAT YOU WANT TO ORDER AND WE WILL EMAIL YOU AN INVOICE. ONCE YOU RECEIVE YOUR INVOICE YOU CAN THEN PAY THE INVOICE IN FULL AND WHEN WE CONTACT YOU TELLING YOU THAT YOUR ORDER IS READY FOR PICK-UP WHICH WILL BE WITHIN 3 WEEKS YOU WILL SIMPLY HAVE TO PAY FOR SHIPPING. YOU WILL NEED TO MAKE YOUR OWN SHIPPING ARRANGEMENTS.
THIS IS THE LOWEST PRICE THE MERCY-1 HAS EVER BEEN OFFERED FOR AND THAT IS WHY THE TOTAL AMOUNT MUST BE PAID UP-FRONT. WE CAN ONLY OFFER THIS PRICE IF THE ORDER IS PAID IN FULL, UP-FRONT.
-IF YOU PAY THE $4,250.00 BY CASH OR BANK WIRE TRANSFER THERE IS NO ADDITIONAL COST; HOWEVER, IF YOU PAY BY PAYPAL OR CREDIT CARD YOU WILL NEED TO ADD A 2% BANK FEE WHICH IS $85.00 TO YOUR TOTAL AMOUNT PAID.
-THE $4,250.00 WILL PAY FOR YOUR CRATED AND READY TO SHIP EXTERIOR AND INTERIOR MERCY-1 FIBERGLASS BODY-KIT AND THE ACCESSORIES PACKAGE #1. WHICH INCLUDES THE REAR, RUBY-RED TAIL LIGHT LENSES AND THE LAMBO DOOR HINGES PLUS ALL THE OTHER ITEMS LISTED FOR THE PACKAGE #1.
-BODY-KIT=MERCY-1
-THIS IS A 1999 BODY STYLE WITH A 104” WHEELBASE DESIGNED TO FIT 97-04 BOXSTER, 84-88 FIERO, 00-05 MR2 OR TUBULAR CHASSIS.
-(NOTE: DONOR CAR STRETCH IS REQUIRED FOR THE MERCY-1)
-THIS BODY-KIT IS AVAILABLE IN A H.T., R.T. or N.T. WHICH MEANS HARD-TOP or REMOVABLE-TOP or NO-TOP
-THESE ITEMS LISTED BELOW ARE CALLED THE “MERCY-1, PACKAGE #1” AND CURRENTLY THEY ARE OFFERED AT NO ADDITIONAL COST:
-ACCESSORIES LIST THAT ARE INCLUDED WITH THE MERCY-1 PACKAGE 1 AT NO ADDITIONAL COST:
-4 Headlight Rings $160.00
-2 Headlight Lenses $250.00
-2 Door Hinge Pins with LAMBO hinges welded on them ready to install $200.00
-2 Taillight Fiberglass Housings and 2 dark, ruby-red REAR-Lenses $500.00 FOR HOUSINGS AND LENSES
-4 Gas Shocks $200.00 WHICH INCLUDE 2 LONG SHOCKS FOR LAMBO DOORS AND 2 SHORTER SHOCKS FOR REAR HATCH
-1 Wooden Shipping Crate $250.00 (SIZE: 181” X 87” X 45” AND WEIGHT: 450 POUNDS).
***TOTAL OF ACCESSORIES INCLUDED AT NO ADDITIONAL COST $1,560.
-NOTE: THESE ARE SOME OF THE ITEMS YOU WILL NEED TO PURCHASE IN ORDER TO COMPLETE YOUR SUPERCAR AND MOST OF THEM CAN BE BOUGHT ON EBAY:
HEADLIGHT PROJECTOR BULBS, FRONT BLINKER LIGHTS, WHEELS AND TIRES, WHEEL-ADAPTERS WITH SPACERS, CHRYSLER SEBRING SIDE-DOOR GLASS, SMALL QUARTER-GLASS, BACK-GLASS, FIBERGLASS INTERIOR-PANELS ARE INCLUDED BUT WILL NEED TO BE COVERED AT AN UPHOLSTERY SHOP, DONOR CAR STRETCHED, METAL-FRAME WELDED FOR BODY-KIT TO MOUNT ON DONOR CAR, MECHANIC TO RE-ATTACH THE WIRES AND HOSES ON THE DONOR CAR AFTER IT IS STRETCHED, BONDO AND PAINT WORK AT A PAINT SHOP, HINDGES FOR ALL DOORS AND HOOD AND HATCH, DOOR POPPERS THAT OPEN THE DOORS, STEREO SYSTEM, SEAT BELTS, PLASTIC GRILL MESH, EXHAUST SYSTEM, REAR-VIEW MIRRORS, LATCHES FOR ALL DOORS, REAR BRAKE-LIGHT BULBS, SMALL ROUND LAMBO DASH-VENTS, FRONT WINDSHIELD, YOU MAY WANT TO LOWER THE FRONT-SUSPENSION AT AN ALIGNMENT SHOP, THERE WILL ALSO BE MINOR ITEMS YOU WILL DISCOVER YOU MAY NEED AS YOU COMPLETE YOUR SUPERCAR PROJECT.
-NOTE: THESE ARE THE OPTIONS YOU CAN ADD TO YOUR MERCY-1 ORDER “AT ADDITIONAL COST”:
-NOTE: WE RECOMMEND YOU BUY FROM EBAY AND INSTALL A PIONEER TOUCH-SCREEN, AVH-P3100DVD 5.8” LCD STEREO IN YOUR CAR FOR AROUND $300.00.
-NOTE: YOU MAY WANT TO ADD THE FOLLOWING ACCESSORIES TO YOUR ORDER AT ADDITIONAL COSTS:
-A LARGE REAR SPOILER-WING FOR $300.00 (SEE YELLOW CAR ON MERCY-1 PAGE FOR PHOTO) OR
-A REPLICA MOTOR COVER FOR $450.00 (SEE MERCY-1 PAGE) OR
-A REPLICA STEERING WHEEL COVER INSERT FOR FIERO FOR $75.00 WHICH YOU USE WITH A THREE SPOKE RACING STEERING WHEEL FROM EBAY OR
-A PARTS STORE. YOU CAN GET THE STEERING WHEEL FOR ABOUT $40.00 (SEE MERCY-1 PAGE) OR
-A FIERO HEADREST ATTACHMENT SET $100.00 FOR BOTH (SEE MERCY-1 PAGE AND WATCH THE FIERO SEAT VIDEOS) OR
-THE INNER SIDE PANEL SECTIONS THAT GO BETWEEN THE SEAT AND THE DOOR $150.00 FOR BOTH SIDES (SEE MERCY-1 PAGE) OR
-IF YOU BUY THE MERCY-1 N.T. (NO TOP) VERSION YOU MAY WANT THE MERCY-1 N.T. RAIN COVER FOR $200.00 WHICH IS FOR STORING YOUR CAR OUTSIDE. (SEE MERCY-2 PAGE FOR PHOTO)
-YOU MAY ADD THE “BAT-WINGS UP” OPTION FOR $250.00 AND THEN YOU ARE ABLE TO ATTACH YOUR “BAT-WINGS” TO YOUR BODY-KIT IN THE UP-POSITION ALL THE TIME OR MAKE THEM GO UP AND DOWN WITH THE PUSH OF A BUTTON.
-MERCY-1 ACCESSORIES “PACKAGE #2.”:
-WE OFFER THESE ADDITIONAL MERCY ITEMS KNOWN AS
“MERCY ACCESSORIES PACKAGE #2.” FOR PEOPLE THAT DO NOT WANT TO HAVE TO SHOP ON EBAY OR GO TO SALVAGE YARDS FOR THESE PARTS:
-1 SET P6 LARGE PROJECTOR BULBS FOR HEAD-LIGHTS $125.
-1 SET P1 SMALL PROJECTOR BULBS IN BLUE FOR HEAD-LIGHTS $100.
-1 SET 80 POUND DOOR POPPERS WITH 2 ELECTRIC PUSH BUTTONS AND 2 PULL CABLES $200. THE HAND-HELD REMOTE BUTTON WILL OPEN DOORS FROM OUTSIDE AND THE PUSH BUTTONS WILL OPEN DOORS FROM INSIDE AND THE PULL CABLES WILL OPEN DOORS IN CASE THE BATTERY IS DEAD ON THE VEHICLE.
-2 SETS OF THE MITSUBISHI 3000GT HOOD HINGES (2 FOR HOOD AND 2 FOR REAR-HATCH) $100.
-2 SETS MERCEDES w126 style DOOR LATCHES AND LATCH-STRIKER/RECEIVERS $200.
-1 EUROPEAN TAG AND PLASTIC TAG HOLDER FOR FRONT BUMPER $50.
-1 SET FIERO HEADRESTS $100. WE SUGGEST YOU USE FIERO SEATS FOR MERCY 1 OR 2 OR 4 BODY-KITS AND INSTALL THESE HEADRESTS ON FIERO SEAT-FRAMES AND THEN HAVE FIERO SEATS UPHOLSTERED.
-4 L.E.D. RED, ROUND, BRAKE LIGHTS THAT GO INSIDE THE REAR TAIL LIGHT FIBERGLASS HOUSINGS $125.
-2 SMALL, FRONT BLINKER LIGHTS THAT GO INSIDE HEADLIGHT HOUSINGS $25.
***TOTAL FOR MERCY PACKAGE #2 IS $1,025.00
*LIST OF THE PARTS THAT MAKE UP THE MERCY-1 BODY-KIT WITH THE EXTRAS.
FULL, ONE-PIECE, BODY-KIT THAT HAS THE BUMPERS, FENDERS, QUARTER
PANELS, SIDE ROCKER PANELS, WINDOW FRAMES, TOP AND HEADLIGHT HOUSINGS
MADE INTO IT. (THIS IS INCLUDED IN THE MERCY-1 KIT PURCHASE THAT IS $3,995.00 ALONG WITH THE ITEMS BELOW MARKED INCLUDED.)
HOOD. (INCLUDED)
SMALL, TRUNK PANEL. (INCLUDED)
LARGE, EXTERIOR, MOTOR-COVER PANEL. (INCLUDED)
TWO, 2-PART, DOOR SHELLS. (INCLUDED)
TWO, QUARTER-GLASS, TRIM PIECES. (INCLUDED)
TWO, REARVIEW, MIRROR HOUSINGS. (INCLUDED)
INTERIOR KIT:
The
interior kit is included with the purchase of your Mercy-1, body-kit
and the interior kit is made up of 12 fiberglass pieces. The 12 piece interior kit is made
up of 3 pieces on the inside of each door panel and 3 pieces that make
up the dash which is the actual dash and the cover that covers the
instrument cluster and a triangle shaped handle in front of the radio
and these pieces makeup a total of 9 of the 12 pieces. The console
which is the tenth piece is located between the two seats and it is
made up of two console pieces. The two pieces that make up the
console is the one armrest/console piece that is included in the
interior kit and the long, console piece that runs
from the radio, back between the seats. Most people cover this long,
console piece in carpet or vinyl. The
armrest/console, fiberglass piece that you receive from us will set on
top of the long, console piece. You can use
the Fiero seats and you can attach two fiberglass panels to make the seats more sportier looking.
The 12 piece interior kit is made up of 3 pieces for each door panel
which is a total of 6 pieces for the two doors and 3 pieces for the
dash and 1 fiberglass piece for the console/armrest for a total of 12 pieces. Some people choose to buy
racing car seats for their Mercy-1, body-kit instead of using the
upgraded Fiero seats. (NOTE: For additional information, see the photos
that show the completed Mercy-1 interior and also see the photos of the
gray, fiberglass interior pieces that make up the interior kit on the
Mercy-1 website page.)
(note= also click interior tab on accessories page)
TWO HEADLIGHT LENSES. ($250.00 FOR THE PAIR)
TWO TAILLIGHT HOUSINGS. ($250.00 FOR THE PAIR)
FOUR HEADLIGHT RINGS. ($160.00 FOR THE SET OF 4)
TWO 30" GAS SHOCKS FOR DOORS. ($100.00 FOR THE 2)
TWO 26.5 GAS SHOCKS FOR THE LARGE, EXTERIOR, MOTOR- COVER PANEL. ($100.00 FOR THE PAIR)
TWO ROCKER-PANEL SIDE-VENTS (INCLUDED)
TWO DOOR-HINGE PINS. ($100.00 FOR THE PAIR)
ONE V-12 MOTOR COVER. ($450.00 FOR THE COVER)
HEADLIGHT PROJECTOR BULBS. (EBAY)
TAILLIGHT L.E.D. BULBS WITH PLEXIGLASS LENS. (EBAY OR PARTS STORE)
The
large, rear spoiler that is located on the yellow car is not included
with the Mercy 1 kit. This kit is a beautiful conversion kit. You can
now own the italian styled super-car of your dreams. This kit is
designed to be installed on a 1984-1988 fiero but you can make it fit
on a 1997-2004 boxster or 1991-1995 Toyota MR2
We suggest the donor car be
slightly damaged because the sheet metal will not be used on the
finished kit and you will save a lot of money by using a damaged donor
car. All unused body parts can be resold as scrap or resold on
ebay as reusable body parts.
The stock wheelbase of a fiero is 93.4" and the wheelbase for the real deal is 105.1" when you add 10.5" to the Fiero's wheel base your wheel base will then match the Mercy-1 body-kit of 104".
You will stretch the fiero donor car body by about 10.5'.
Stretching the Fiero 1 of 2 (above) talks about:
1. 10 1/2" Fiero frame stretch
2. Frame for rear hatch
3. Lambo door hinge
4. Lambo gas shocks
5. Lambo door latch
6. Lambo door glass
7. Metal grill mesh
8. Bat wings.
Stretching the Fiero 2 of 2(above) talk about:
1. Hood hinged
2. Frame extended
3. Windshield frame support The wheelbase is 104" For the MERCY-1 body-kit Lambo V12 Replica motor cover($450.00):
Headlights:
Some people use the projector bulbs out of a 92-96 ES-300
NOTE: If you need the dash vents go to www.lambostuff.com And look up part number 009414507 and they are $31.48 or use a round pontiac dash vent. Search eBay for "Pontiac dash vent" Glass:
For the MERCY-1 front windshield you use a 1996 Nissan Maxima windshield.(You will have to trim glass)
For the side quarter glass windows and back glass, you use clear plexiglass or cut flat glass.
For the door glass you use 1996-2000 2 door Chrysler Sebring door glass.
If you decide to make your door glass stationary we're told the best glass to use is a 2000 Saturn Coupe door glass.
Some people have used a 1996 rear Nissan Maxima door track and window motor with a 00-01' Daewoo Leganza 2 door coupe door glass.
Some people have also used rear window regulators from an Infiniti J30 to make the window glass go up and down and they have bought custom door glasses from AGP Glass Company in Knoxville, TN.To order the door glass from AGP you can see their contact information below, and when you place the order you ask for 2001 Diablo Roadster factory door glass number 59 and 60.
Mercy 1 fiberglass body kit Images
Rear clip section
two part door shells
misc. interior pieces
front clip section laying upside down
trunk lid with vents
left side body panel
Mercy 1
R.T. fiberglass, body kit with hood and one door shell laying on body kit
Mercy 1
R.T. fiberglass, body kit with trunk and one door shell on body kit
MERCY 1 N.T. crated and ready for
shipping after the crates top is installed
Mercy 1
body kit, quarter-glass, trim pieces.
The trim piece to the right has had the fiberglass, edge trimmed.
The trim piece to the left has not had the fiberglass, edge trimmed.
These trim pieces can be painted and attached to the side, quarter-glass
pieces as trim.
Use plexiglass for the side, quarter-glass pieces and the back glass piece
on the car.
Two-part, Mercy 1, door shell.
Use Corvette, fiberglass, panel-bonding gel to glue the two, door sections
together.
Use a universal, door-glass regulator from eBay to make the door glass go
up
and down or you can make the glass stationary. Cut out the fiberglass
panel
from the door shell, where the door glass will go. The rearview mirror
housings are also included in the Mercy 1 interior kit. We sell the Mercy
1
door hinges for only $50.00 each and you will need two hinges per car.
Mercy 1, body kit, interior, dash pieces.
Use either the large or the small, instrument-cluster cover with the dash.
Some people use the small, cluster cover with a 2000 and up ford focus
instrument-cluster and wire it to the stock Fiero motor or they use the
larger-sized, instrument-cluster cover if they use a 1993 Chev. Camaro
cluster or any other larger sized instrument-cluster. Some people use the Oldsmobile cluster that goes with the
general motors super charged 3800 motor; for example they use a Buick park
avenue motor and park avenue instrument-cluster, or they buy individual
instrument-cluster gauges and build their own instrument-cluster
This is the three-part, door panel for the Mercy 1 interior.
The top, small piece goes near the back,top corner of the door panel.
The large panel piece can have the speaker hole cut-out so you can install
a
speaker.
The medium sized, armrest piece will go on top of the door panel's armrest
section, after the edge is trimmed off the armrest piece and after all the
pieces are covered in vinyl or leather.
MERCY-1 R.T. with a $300.00 rear spoiler photographed
Mercy 1-R.T. version
Mercy 1-R.T. version.
Mercy 1-R.T. version
MERCY 1 HOOD FRAME:
Notice the metal frame for the hood with a latch and two hinges. A wooden
stick is holding the hood frame up in the second photo. The first photo
shows the hood frame latched.
THIS IS A PHOTO OF THE CUSTOM-MADE, HINGE-PIN
AND ROLLERS THAT WE OFFER FOR $50.00 EACH.
YOU WILL NEED TWO IN ORDER TO COMPLETE THE BODY-KIT.
THE BRASS WASHERS ARE INCLUDED AND THE WASHERS
ALLOW THE DOOR TO OPEN AND CLOSE SMOOTHLY.
Tail light housings with frames are $125. each side. You add L.E.D. bulbs
and lenses to complete the tail lights. If you buy our taillight housings;
but within 30 days choose to install factory taillights, you may return ours
for a full refund, less any shipping fees.
Some people paint the taillight housing and frame
black and then use "a black tinted lens" to complete
the taillights in a "blacked-out look".
Paintable, headlight rings that go around your headlight bulbs.
We offer these 2.75" and 3.5" headlight rings for $40.00 each.
You will need two of each size to complete your headlights.
Gas shocks for the rear hatch and the side doors.
You will need two 30", 150 lb. gas shocks for the side doors.
The part number on these 30" gas shocks is #703-150lb.
You will also need two 26.5",150 lb. gas shocks for the rear hatch.
The part number on these 26.5", 150lb. gas shocks is Y2044
You can get the gas-filled shocks on eBay or at any auto parts store.
WE SALE THE EXACT GAS-SHOCKS YOU WILL NEED FOR $50.00 PER SHOCK. YOU WILL NEED FOUR GAS SHOCKS PER BODY KIT
Mercy-1 fiberglass, rearview, mirror housing
USE THIS DRAWING TO EXPLAIN HOW TO CUT
AND WELD THE DOOR HINGES FOR THE MERCY-1.
USE THE DOOR HINGE PINS AND ROLLERS
THAT WE SALE FOR $50.00 EACH AND THEN
WELD THE HINGE PLATE AND HINGE ARM
ONTO THE HINGE PIN AND ROLLER.
MERCY-1 REAR, HATCH COVER
FOR THE NO TOP VERSION.
Mercy 1
Center-console, interior, armrest piece.
Cover this console piece with padded vinyl or leather. The center console goes between the seats in the car.
MERCY-1 DASH PANEL WITH SMALL AND
LARGE SIZE INSTRUMENT-CLUSTER COVERS.
TWO ROCKER-PANEL SIDE-VENTS
THIS IS A PHOTO OF THE REAL DEAL.
FOR
ONLY $100.00 EXTRA YOU CAN
ATTACH THESE "CAR-SEAT, HEADREST PARTS" TO YOUR FIERO SEATS; BEFORE THE
SEATS ARE RECOVERED, TO MAKE THE SEATS LOOK MORE LIKE LAMBO, RACING-CAR
SEATS.
FOR ONLY $450.00 PLUS SHIPPING YOU WILL
RECEIVE THIS "TEN PIECE," FIBERGLASS,
V-12, REPLICA, MOTOR-COVER KIT. YOU WILL
ADD THREE BRASS FITTINGS, A COUPLE
OF ?" SMALL BLACK HOSES AND TWO, BIG,
BLACK HOSES FROM A PARTS STORE AND
THEN PAINT THE COVER BLACK AND SILVER.
YOU WILL ALSO ATTACH THE SMALL, TWO-TONE,
BLACK AND SILVER PIECES THAT ARE
PHOTOGRAPHED ABOVE TO THE LARGE,
SILVER BODY OF THE MOTOR COVER WITH
TWO NUTS AND BOLTS.? (INSTRUCTIONS INCLUDED)
Front View
Motor Cover Replica
Side View
Rear View
Mercy 1 H.T
Mercy 1 H.T.
MERCY-1 R.T.
Mercy 1-R.T. version. Notice smaller, black vents in bumper.
Mercy 1-R.T. version.
Mercy 1-R.T. and Mercy 2-N.T
Mercy 1-R.T. version.
Mercy 1-R.T. version. Notice the factory style tail lights.
Mercy 1-R.T. version. Notice the seam on the top that allows top to be removed.
Mercy 1 - R.T.
Mercy 1 N.T.
Mercy 1- N.T.
Mercy 1-N.T. version.
Mercy 1-N.T. version.
We sell this hinge and gas shock
THE VIDEO BELOW DESCRIBES Lambo Replica Windows, Doors, And Bat-Wings. NOTE: BAT-WINGS ARE NOW AVAILABLE. IF YOU WANT THE BAT-WINGS TO WORK UP AND DOWN OR IF WANT TO SIMPLY INSTALL THEM IN THE "FIXED" UP POSITION YOU CAN PAY $250.00 FOR THE 2 BAT-WINGS.
NOTE: NOTICE HOW THE TOP OF THE DOOR FRAME IS CUT AT AN ANGLE SO THAT THE DOOR WORKS ON A NO-TOP VERSION.
NOTE: IF YOU WANT A WILD CHROME LOOK FOR $699.00 YOU CAN ALSO TRY THESE 20” CHROME WHEELS AND THE TIRE SIZE FOR THEM IS 255-30-20 SEE EBAY NUMBER 280379236716 OR CALL THE SELLER AT 209-933-0903 OR SEARCH EBAY FOR THESE WORDS "22 INCH WHEELS B15 BMW"
NOTE: WHEELS ARE A BIG PART OF THE CARS "LOOK" AND IT ALL DEPENDS ON HOW MUCH YOU HAVE TO SPEND. IT IS GOOD IF YOU CAN BUY THE USED LAMBO WHEELS BUT IF NOT YOU CAN MAKE MANY WHEELS WORK ON THE CAR BY SIMPLY ADDING WHEEL ADAPTERS.
NOTE: A GOOD REPLICA WHEEL FOR YOUR MERCY-1 PROJECT IF YOU NEED TO SAVE MONEY WHICH CAN BE BOUGHT FOR AROUND $700.00 A SET IF YOU CAN NOT AFFORD THE REAL WHEELS IT IS A 19” BMW M6 STYLE WHEEL IN ALLOY OR CHROME OR BLACK(pictured above). DO AN EBAY SEARCH FOR THE EBAY SELLER EUROWHEELSUSA OR CALL THEM AT 602-692-4063 OR SEARCH THESE WORDS ON EBAY: "19” BMW M6 WHEELS"
NOTE: FOR THE ALLOY COLORED WHEEL ABOVE SEARCH EBAY FOR ITEM NUMBER 190314166040 THE COST IS $599.00 FOR A SET OF 4 WHEELS OR SEE EBAY SELLER WHEELSANDCAPS SEARCH EBAY FOR THESE WORDS: 19” BMW M6 WHEELS. THIS WHEELS ARE 9.5" WIDE ON THE REAR.
NOTE: THE PHOTO ABOVE SHOWS THE TWO 3.5" AND TWO 3" HEADLIGHT RINGS THAT YOU WILL RECEIVE FROM US TO GO AROUND THE "P1" AND "P6" PROJECTOR HEADLIGHT BULBS THAT YOU CAN GET FROM EBAY IN ORDER TO MAKE YOUR HEADLIGHTS.
NOTE: FOR THE TRUNK AND HOOD HINGES USE A 1991-1996 DODGE STEALTH OR MITSUBISHI 3000GT HOOD HINGE (eBay $25.00 A PAIR). THIS IS A GREAT HINGE FOR ANY KIT-CAR BECAUSE IT MOVES THE HOOD PANEL BACK AS YOU OPEN THE HOOD PANEL UP WHICH ALLOWS FOR A SMALLER GAP BETWEEN THE HOOD PANEL AND THE FRONT BUMPER WHEN THE HOOD IS IN THE CLOSED POSITION.
This photo above shows the left and right tail light lense.
The photo above shows the ruby red tail-light lenses held up in front of a light, and it shows that the lens is in a dark red color the lens appear almost black until you mash the brakes when it is installed on the SUPERCAR-replica.
NOTE: You may purchase this GOLD 1986 FIERO GT today from www.CarKitMaker.com for only $600.00 it is in good condition however you will need to rebuild the motor because it is making a slight knocking sound. This car will work with your MERCY-1 or 2 body-kit.
NOTE: THE GRAY-PRIMERED CAR ABOVE IS A MERCY-1 R.T. UNPAINTED WITH THE WHEELS AND WINDSHIELD INSTALLED.
This photo above is the rear hatch for a Mercy-1 R.T. or H.T. notice how it has louvers on it and when you see a NO TOP version MERCY the rear hatch is different because you loose the back glass and the hatch drops down therefore the hatch is made differently.
Do you want an "in-line", V8 motor installed in the rear of your supercar replica vehicle?
Show
That means the V8 motor would run long-ways with the car from front to rear and not run side to side. Suggestion of an easy and inexpensive V8 installed in a Fiero donor car.
The easiest Fiero to V8 motor for installing, wiring, and price use an in-line V8, GM, 350 Cubic-inch, throttle body motor and add headers to the sides of the motor and a stage-two, cam-shaft, to give it a great sound and more horse power. Also add for about $50.00 A vacuum0adcanced, fuel-pressure device sometimes called a "TWISTER". This device goes under the throttle body and it forces the fuel into the chambers faster than normal which increases the horse power by about 40 horse power. You can run the stock coil on the motor to keep things simple. This is an easy one belt motor and this type motor is found in any 1988 to 1994 Chevrolet product like the V8-Caprice or Monte-Carlo, V8 Chevrolet pickup, vans or SUV's. you can then use a borla or flowmaster exhaust system that you can find used on craig's list or eBay also many exhaust shops sell used flow-masters. We suggest you use the Tornada-Type, In-line, Front- Wheeldize transmission, and stay with the Tornada stock transaxles because they were made to drive the front wheel drive V8 car and a very strong. A FAB shop, machine shop or welding shop can help you with the motor mounts, Also by going with the "In-line" V8 motor it will help balance the weight of the car. You can use a 1981 to 1997 Camaro or Trans-Am style instrument cluster that will look good and easily hookup to the GM, V8 motor. You can choose between a fuel injector or carborator type fuel delivery system. The carborator is the simple way to go. If you want the fuel injector type then for wiring you can use an after-market fender mount computer with wiring harness to run the fuel injection system and distributor and contact summit or seco high performance parts for the computer. If you don't mind having a carborator on top of the motor then you can use only one positive wire to operate the distributor on the motor and one fuel line and not have a computer and this you can't simplify matters easier than that suggestion.
NOTE: you will need an adapter plate from the Chevrolet motor to the Oldsmobile transmission but if you went with any Oldsmobile, Pontiac, or Buick V8 They will bolt-up directly to the Oldsmobile Transmission. A perfect motor for this project would be a 400 cubic inch Pontiac motor out of a 1978 to 1980 Trans Am because you would have the most powerful Pontiac V8 in-line motor bolted to the transmission that allows the motor to be in the car long ways with the car.
Engine information:
The best motor to upgrade the fiero is a 225 h.p. 3800 gm supercharged
engine with auto or manual transmission or you can keep the factory
fiero motor.
Lee at H.T. motor sports at 616-893-1433 in mi.
Can sell you upgrades for the fiero like brakes, suspension, etc. Or
you can keep the fiero as a stock vehicle.
Some people add a carbon fiber dash kit off ebay to the interior for about $40.00.
Some people add a turbo simulator; which is also called an exhaust pipe
whistler, to the car. This makes the car sound like it has a bigger
motor with a turbo and you can get this at any automotive parts
store or on ebay for about $12.00.
The average
turn-key car is worth $27,000.00 to $45,000.00 and we can teach you how
to own a completed car for around $12,000.00. (donor car $2500.00 + kit
$6k + wheels and tires $2k + spacers $500.00 + paint materials $500.00
+ misc. $500.00 = $12k)
Freight runs around $300. to $500
East of Mississippi and $200. to $900. West of Mississippi. There will
be a wooden crate, crating fee at cost if you want it shipped.
The black grill mesh can be bought at any hardware store for just a few dollars or you can use factory mesh grills.
Door glass uses the 1996-2000 Chrysler sebring coupe. Your windows can be stationary or you can make them power up and down.
Door seals uses the 10 year old V.W. Jetta
Rings for head lights are at any auto parts store and we also offer the rings at $160. For 4 headlight rings.
Door and trunk gas shocks are to be gotten at any parts store.
Actual head lights use bmw fog lights or select another type small round light from any auto parts store.
Windshield uses the 1996 nissan maxima and cut the corners.
Door locks uses any old 70s or 80s mercedes lock or use a 300sd or 250s or 280sel or 200c mercedes door lock. Any salvage yard that specializes in older Mercedes will have the door latch that goes on the door shell and the latch catch that goes on the door jam. Simply request a chassis series #126 which is out of a '73-'80 Mercedes.
Seat belts from ebay or use the nissan pulsar type belts.
For the quarter panel glass use 1/8" plexiglass.
For the grill use factory grills or paint metal screen mesh black and get it from any hardware store.
We offer the door springs at $50.00 each.
For the front head light lens we offer them at $125.00 each.
For the rear tail light lens we offer them at $150.00 each.
We suggest for the wheels to use factory styled wheels found on ebay.
This kit comes in a hard-top coup or a removable hard top or a no-top
topless car. The removable top is the most popular version.
Interior
kit is included and it is made up of eight pieces: the interior is made
up of 3 pieces on the inside of each door panel and 3 pieces that make
up the dash which is the actual dash and the cover that covers the
instrument cluster and a triangle shaped handle in front of the radio
and then the console which is located between the two seats is made up
of two pieces. You will use the fiero seats and you can attach two
fiberglass panels which is also included to them to make them more
sporty.
We can sell you a real European front car tag with a
black plastic holder for $50.00 or you can get one on ebay. Some people
put this on the front bumper of the completed car.
Notice: The rear spoiler wing pictured on the yellow car
below does not come with the kit. The wing can be
purchased for an additional $300.00.
The Door latches that can be used for the MERCY-1 are Mercedes-Benz part #: (1267230208)
IF YOU WANT YOUR MOTOR TO BE TURNED LONG-WAYS...
IF YOU WANT YOUR MOTOR TO BE TURNED LONG-WAYS WITH THE BODY OF THE CAR YOU CAN USE A TRANSMISSION OUT OF A 1979-1985 (NOTE: WE ARE NOT EXACTLY SURE OF THE YEARS THAT WORK SO VERIFY BEFORE YOU BUY A LOW MILEAGE PARTS CAR FOR THIS PROJECT) CADILLAC ELDORADO OR BUICK RIVIERA OR OLDS TORONADO FOR EXAMPLE BECAUSE THAT TRANSMISSION ALLOWED THE MOTOR IN THESE CARS TO BE PLACED LONG WAYS WITH THE CAR BUT THE DRIVE AXLES ARE TURNING THE FRONT WHEELS THEREFORE YOU COULD FOR EXAMPLE PUT A BIG BLOCK CHEVY 454, V8 MOTOR IN A FIERO AND ADD THE ABOVE LISTED TYPE TRANSMISSION WHICH WOULD ALLOW THE REAR FIERO WHEELS TO TURN WITH THE MOTOR LONG WAYS IN THE BODY OF THE FIERO WHICH IS LIKE THE REAL DEAL.